Products

Nylene Nylene NX3024F is a medium viscosity nylon 6 resin suitable for general purpose molding applications. In addition to excellent melt stability and good melt strength, NX3024F has excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene NX3024F meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die.

Nylene General purpose, 20 % glass fiber-reinforced poly(phenylene ether) (PPE) alloy Areas of application include water contact areas such as impellers and pump housings Suitable for applications such as motor housings which require high modulus and distortion temperature

Nylene Nylene NX1731 is a general purpose grade nylon 6 resin which is suitable for molding or extrusion. It is recommended for industrial applications where the toughness, chemical resistance, and high temperature properties of nylon 6 are required but where some color variation is acceptable. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die or nozzle.

Nylene Heat stabilized nylon copolymer with 14% glass fiber reinforcement Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids Suitable for such uses as under-the-hood fluid reservoirs Maximum clarity is achieved by using low mold temperatures

Nylene Glass and ceramic fiber reinforced nylon 6 injection molding material Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products Suitable for such uses as valve bodies, pump housings, hydraulic fittings and couplings, and other applications which require this unique set of characteristics

Nylene 33% glass fiber reinforced nylon 6/10 injection molding grade. Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for pump housings, inlet housings, fittings, and other uses where moisture pickup may be a concern

Nylene 43% glass fiber reinforced nylon 6/10 injection molding grade Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for pump housings, inlet housings, fittings, and other uses where moisture pickup may be a concern

Nylene General purpose, 30 % glass fiber-reinforced poly(phenylene ether) (PPE) alloy Areas of application include water contact areas such as impellers and pump housings and motor housings which require high modulus and distortion temperature UL recognitized

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die