Products

Nylene Specially formulated nylon 6 molding resin possessing outstanding flow characteristics Ideally suited for applications requiring high flow properties and resistance to cracking Optimum processing conditions should provide a melt temperature of 450 - 470°F at nozzle

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene Heat stabilized version of 733, which is a highly impact modified nylon suitable for both molding and extrusion In addition to heat stabilization to prevent thermal degradation, parts molded from 734 have excellent impact strength right out of the mold without post conditioning Outstanding features include high stiffness and high strength Cylinder temperatures should be in the 500-550°F range.

Nylene Nylene NX3024F is a medium viscosity nylon 6 resin suitable for general purpose molding applications. In addition to excellent melt stability and good melt strength, NX3024F has excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors. Nylene NX3024F meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact. Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die.

Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene Unreinforced general purpose polycarbonate injection molding grade Has the high impact resistance and heat resistance typical of polycarbonate Available in water white, blue tint, black, and pre-colored Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

ALM Polycarbonate™ PC30 by Polymeric Resources Corporation is comprised of Polycarbonate. It is commonly used for a variety of applications. .

Nylene Heat stabilized version of 406 which is a general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation Parts molded from 409 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

Nylene Unreinforced heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene General purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded from 406 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

Nylene General purpose Economy grade Polycarbonate Retains good properties, at a beneficial cost / performance ratio Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

Nylene Un-reinforced general purpose polycarbonate Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio Suitable for such applications as housings and enclosures, brackets, connectors, etc

General purpose poly(phenylene ether) (PPE) with good heat stability for extrusion applications

Nylene Resin formulated to comply with FDA regulation 21CFR 177.1500 for food contact applications, and ANSI/NSF Standard 14 General purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded from 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

Nylene General purpose polycarbonate produced from recycled feed-stocks Retains the high impact resistance and heat resistance of virgin polycarbonate while improving the cost / perfomance ratio Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses.

Vexel™ B12U by Polymeric Resources Corporation is comprised of Polybutylene Terephthalate. It is commonly used as Molding Resin for a variety of applications in Automotive.

Nylene Medium viscosity, general purpose nylon 6 molding resin which has been ground cryogenically to a very fine powder Excellent melt stability, grease resistance, and toughness

Nylene High impact resistance PC/ABS alloy Designed to provide good moldability and a general purpose property profile Suitable for uses such as housings, enclosures, faceplates, covers, and other applications which require good dimensional stability and high impact resistance

Nylene General purpose un-reinforced nylon 6 injection molding resin. High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding

Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

Nylene General purpose, UV stabilized polycarbonate molding resin Has the high impact resistance and heat resistance typical of polycarbonate, while adding a UV stabilizer package for improved weatherability Suitable for enclosures and housings, trim panels, and consumer items that may experience increased light exposure

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

Nylene Heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning Stiffness is near that of unmodified nylon 6 Barrel temperatures should be in the 450°F - 500°F range.

Compounding, General Grade, mid RV, unlubricated.

General purpose poly(phenylene ether) (PPE) intended for injection molding This product is UL recognized

Nylene General purpose 15% glass fiber reinforced PBT polyester resin Has the high chemical and heat resistance of PBT combined with improved strength and stiffness Suitable for brackets, levers, electrical connectors, housings and other similar uses

33% glass fiber reinforced nylon 6 featuring high tensile strength, stiffness and impact resistance

Nylene Food-contact FDA compliant un-reinforced nylon 6 injection molding resin High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding Compliant with 21CFR177.1500

Nylene Nylene NX4004A HS BLACK is a heat stabilized, economy grade nylon for general purpose molding applications. In addition to protection from heat degradation, NX4004A HS BLACK has good flow characteristics at typical processing temperatures for nylon 6. Optimum processing conditions should provide a melt temperature of 450 - 470°F at the nozzle.

Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses

Nylene General purpose un-reinforced, heat stabilized nylon 6 injection molding resin High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding

Nylene General purpose polycarbonate injection molding grade High impact resistance and heat resistance typical of - Available in water white, blue tint, black, and pre-colored Suitable for such applications as housings and enclosures, brackets, connectors and other typical polycarbonate type uses

General purpose nylon 6 Economy Grade resin

General purpose nylon 6 Economy Grade resin.