Nylene® 406F

1 of 171 products in this brand

Nylene Resin formulated to comply with FDA regulation 21CFR 177.1500 for food contact applications, and ANSI/NSF Standard 14 General purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up Parts molded from 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

Polymer Name: Polyamide 6 (PA 6)

Flexural Modulus: 2760.0 - 2760.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Polyamides
Polymer Name: Polyamide 6 (PA 6)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Labeling Claims: Food Contact Acceptable
Materials Features: Dimensional Stability,
Fast Molding Cycle,
Food Contact Acceptable,
General Purpose

Applications & Uses

Markets: Consumer Goods
Applications: Consumer Goods — Other Consumer Goods Applications
Plastics & Elastomers End Uses: General Purpose

Properties

Mechanical Properties
Physical Properties
Thermal Properties

	Value	Units	Test Method / Conditions
Tensile Strength	75	MPa	ISO 527
Flexural Modulus	2760	MPa	ASTM D790
Izod Notched Impact Strength (23°C)	43	kJ/m2	ISO 180/1A
Elongation	25	%	ASTM D638

	Value	Units	Test Method / Conditions
Specific Gravity	1.13	-	—

	Value	Units	Test Method / Conditions
Deflection Temperature Under Load - DTUL (264 psi (1.8 MPa))	71	°C	ASTM D648
Deflection Temperature Under Load - DTUL (66 psi (0.45 Mpa))	182	°C	ASTM D648
Melting Point	215	°C	ASTM D3418

Regulatory & Compliance

Certifications & Compliance: NSF Approved

Packaging & Availability

Country Availability: Canada,
USA
Regional Availability

Nylene® 406F

Similar Products

Akulon® XS32-E2 (FC-X9200)

Akulon® XS36-C1 (FC-X9224)

Akulon® XS36-E2 (FC-X9201)

Aegis® PIR-H85NP

Aegis® PIR-H100MP

Aegis® PIR-H100QP

Knowde Enhanced TDS