Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Key Features
- Specially formulated UHMW-PE for temperatures up to 400ºF.
- Toughest liner for hot asphalt.
- Best sliding surface.
- Lifetime warranty available.
- UV protection.
- Reduces haulback.
- Added lubricity.
- Added water protection.
- Eliminates freezing
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Recommended Applications
- Hopper Liners.
- Blacktop Liners.
- Gravity Box Liners.
- Dump Truck Liners.
- Forage Box Liners.
- Forage Wagon Liners.
- Manure Spreader Liners.
- Air Boat Hull Bottom Liners.
- Lime Tender Liners.
- Overhead Bin Liners.
- Sand Spreader Liners.
- Roll Off Trailer Liners.
- Container Trailer Liners.
- Side Dump Trailer Liners.
- Off Road Dump Trailers.
Properties
- Physical Form
- Typical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | 9 | - | - |
| Coefficient of Friction, Kinetic | 0.1 | - | ASTM-D1894 |
| Coefficient of Friction, Static | 0.15 | - | ASTM-D1894 |
| Density | 0.935 | g/cc | ASTM-D792 |
| Durometer Hardness | 64 | Shore D | ASTM-D2240 |
| Elongation at Break | 250 | % | ASTM-D638 |
| Izod Impact Srength | min. 95 | KJ/m2 | ASTM-D4020, Method A |
| Tensile Strength at Yield | 3100 | psi | ASTM-D638 |
| Water Absorbtion at Saturation | 0.01 | % | ASTM-D570 |
| Value | Units | Test Method / Conditions | |
| Melting Point | min. 350 | °F | - |
| Coef. Of Linear Thermal Expansion | 7 X 10^-6 | in/in/°F | ASTM-D696 |
| Flammability | HB (1/8 inch) | - | UL-94 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant | 2.3 | - | ASTM-D150 |
| Dielectric Strength | 90.3 | KV/m | ASTM-D149 |
| Surface Resistivity | 1 X 10^12 | ohm | ASTM-D257 |
| Volume Resistivity | 1 X 10^14 | ohm-cm | ASTM-D257 |