Products

Polyslick® UHMW Sheet exhibits the properties of excellent impact strength, abrasion resistance, low coefficient of friction, as well as very good chemical resistance. This industrial grade material is also moisture, stain and odor resistant, and is FDA approved to be used in the food processing industry. The material is ideally suited for wear applications especially in contact with metals. UHMW is widely used in industrial applications such as chute linings, dock bumpers, paper machine parts, and conveyor wear strips and can easily be machined with ordinary wood working tools.

Ultra Non-Skid® technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is Luns permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with anti-skid material comprised of slag.

The High Temperature liner is designed to haul hot asphalt up to a temperature of 400 degrees Fahrenheit. Our Heat Stabilized dump truck liner is our most durable & protective liner, while also utilizing additives to provide for our best sliding surface to fight against material build up and additional hydraulic pressure used to extract material from your dump truck bed. When compared to HMW liners, UHMW liners are 3-5X more resistant to wear. The High Temperature liner ranges from 1/4” to 1/2” thickness, and can be manufactured in widths from 1’ to 16’ feet wide.

MECHETEC® PET from Polymer Industries is a semi-crystalline polyester terephthalate (PET) polymer that exhibits excellent strength, rigidity, and is easily machined. Additionally, this material offers dimensional stability and wear resistance that meets or exceeds that of nylon or acetal. Due to it’s superior chemical resistance and food contact approvals, MECHETEC® PET stock shapes are the preferred material for components in food processing applications such as pistons, valves, feed screws, and food product forming and extrusion dies. Additionally, the low moisture absorption and low rate of thermal expansion offered by MECHETEC® PET makes it ideal for demanding applications that require close tolerance, precisely machined component parts. Formally known as Unipet PET. For more Info : Click Here

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.

Our Medium Duty dump truck liner is manufactured from a high molecular weight (HMW) polyethylene extrusion. This plastic liner is designed for lighter hauling, and is subsequently priced more cost-effectively than our heavier duty dump truck liners. The Mid-Grade dump truck liner ranges from 1/4” to 1/2” thickness, and can be manufactured in widths from 1’ to 16’. We recommend against hauling any asphalt with this grade of dump truck liner.

Our Heavy-Duty liner is manufactured from an ultra-high molecular weight (UHMW) polyethylene extrusion to produce a plastic liner designed for heavy-duty hauling. When compared to HMW liners, UHMW liners are 3-5X more resistant to wear. Heavy-Duty liners are suitable for larger rock and heavier hauling. The Heavy-Duty liner ranges from 1/4” to 3/4” thickness, and can be manufactured in widths from 1’ to 16’ feet wide. We recommend against hauling any asphalt with this grade of liner. This liner can withstand temperatures up to 180 degrees Fahrenheit.

Ultra Non-Skid® technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is BraxxTM permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with raised non-skid truncated domes comprised of sand or slag. Not only is the product a tactile warning surface, it also has a contrasting color theme (dark on light or light on dark). BraxxTM is available in UV yellow with a black slag surface and blue with a white sand surface.