Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
- UV resistant.
- Great weldability.
- High tensile strength.
- Stiffness for machine parts.
- RoHS and REACH compliant.
- Formable.
- Chemical resistant.
- Stress crack resistant.
- Scratch & abrasion resistant.
- NSF 14 and 61 certified for potable water.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recommended Applications
- Water Mains.
- Aquatic Piping.
- Aeration Systems.
- Agriculture Pipelines.
- Skid and Deflector Plates.
- Hazardous Waste Transfer.
- Acid Transfer.
- Pipe End Caps.
- Gravity Sewers.
- Drainage Systems.
- Roll Stand Bearings.
- Milled Flange Adapters.
- Pipe Flanges.
- Machine Parts.
- Pipe Reducers.
- Tanks & Containers.
- Guides and Wear Plates.
- Manhole Lids & Bottoms.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Brittleness Temperature | max. -75 | °C | ASTM-D746 |
Density | 0.955 | g/cc | ASTM-D1505 |
Flexural Modulus | 960 | MPa | ASTM-D790 |
Hydrostatic Design Basis, 140 °F (60 °C) | 5.5 | MPa | ASTM-D2837 |
Hydrostatic Design Basis, 73 °F(23 °C) | 11 | MPa | ASTM-D2837 |
Material Classification | Type III, Class C, Category 5, Grade W8/W9 | — | ASTM-D1248 |
Material Classification | Type III | — | ASTM-D4801 |
Melt Flow Rate (HLMI) | 0.11 | g/10 min | ASTM-D1238 |
Minimum Strength Required | 8 | MPa | ISO 9080 |
PENT Slow crack Growth | min. 100 | hours | ASTM-F1473 |
Polyethylene Plastic Pipe Classification | PE 4710 | — | F412 & Plastic Pipe Institute |
Potable Water Standards | Meets Standards 14 & 6 | — | NSF International |
Tensile Strength at Yield | 22 | MPa | ASTM-D638 |
Ultimate Elongation | 800 | % | ASTM-D638 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards