Products

Polyslick® UHMW Sheet exhibits the properties of excellent impact strength, abrasion resistance, low coefficient of friction, as well as very good chemical resistance. This industrial grade material is also moisture, stain and odor resistant, and is FDA approved to be used in the food processing industry. The material is ideally suited for wear applications especially in contact with metals. UHMW is widely used in industrial applications such as chute linings, dock bumpers, paper machine parts, and conveyor wear strips and can easily be machined with ordinary wood working tools.

MECHETEC® PVDF (Polyvinylidene Fluoride) is a non-reinforced highly crystalline fluoropolymer that combines exceptional chemical resistance with superior strength and stability. When compared with traditional fluoropolymers like PTFE, MECHETEC® PVDF offers up to three times the typical strength and stiffness while maintaining unparalleled resistance to even the harshest chemicals—even at temperatures up to 300°F. These properties, along with its natural flame retardency (UL94, V-0) and ultrahigh purity have made it the material of choice for processing equipment components used in semiconductor manufacturing clean room environments. Because it also offers excellent toughness and electrical properties that remain stable over a wide range of both frequencies and temperatures, MECHETEC® PVDF is also often used in components used for power transmission. MECHETEC® PVDF is offered in two grades; MECHETEC® PVDF 740 (beige) and MECHETEC® PVDF 1010 (white). Both grades machine easily and are available in a full range of heavy gage rod and plate sizes. Formally known as Uninar PVDF.

MECHATEC ACETAL is a Polyoxymethylene Copolymer ( POM-C ) which has excellent machining stability, high strength and stiffness, superior wear resistance, large size capability.

MECHETEC® Delrin® (polyoxy-methylene) offers design engineers a superior blend of strength, stiffness, lubricity, and dimensional stability. These properties, along with inherent machining ease, have made MECHETEC® Delrin® one of the most widely used engineering grade thermoplastics. To meet specific application configurations and to maximize production efficiencies, Polymer Industries offers a broad array of MECHETEC® Delrin® stock shapes. These materials include both homopolymer unfilled grades as well as PTFE-filled grades for enhanced wear resistance and DE-588 options for military applications. Formally known as Unital Delrin. For more Info : Click Here

Densetec® Marine Board is specially formulated to withstand the rigors of harsh outdoor marine environments. It is UV-stabilized to resist damage and retain its beauty, even after years of direct sunlight. Increasingly, Densetec® Marine Board is replacing wood and laminates in boating applications. It does not splinter,crack, delaminate, rot, swell, or absorb water like traditional materials. Even under heavy foot traffic on yacht decks, it remains virtually maintenance-free. In addition, there is no need to stain or paint Densetec® Marine Board every few years. The color is integrated with the polymer and retains its vibrant appearance better than painted wood. Fabricating and finishing are easy with standard woodworking tools. Densetec® Marine Board forms easily for smooth curves and bends. Since there is no grain pattern, parts can be cut from any part of the sheet virtually eliminating waste for greater economy than wood. Densetec® Marine Board is also available in two other formulations for specific applications: Densetec® Marine HP (High Performance) and Densetec® Marine LW (Lightweight).

Since its introduction in 1938, Nylon has become one of the world’s most widely recognized and utilized engineering grade thermoplastics. Nylon’s unique combination of high strength, good toughness, outstanding chemical resistance, and excellent wear and abrasion resistance have made it the material of choice for product designs in a multitude of industries. When used to replace wear grade metals like brass and bronze, no other material provides the combination of extended wear life, light weight, and low fabricated part cost of Nylon. Polymer Industries manufactures MECHETEC® Nylon stock shapes in a wide variety of types and stock shape configurations including glass filled and molybdenum disulfide (MoS2 or moly) filled options. Formally known as Unipa Nylon. For more Info : Click Here

Polymer Industries' Densetec® High Density Polyethelyne sheet exhibits the properties of high impact strength, abrasion resistance, and low coefficient of friction. The material is also moisture, stain and odor resistant, and is FDA approved to be used in the food processing industry. The material's durability makes it ideally suited for a variety of applications such as water tanks, chute linings and numerous industrial uses.

MECHETEC® PEEK ( Polyetheretherketone) is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. MECHETEC® PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. MECHETEC® PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled MECHETEC® PEEK offers good wear resistance, Polymer Industries also offers MECHETEC® PEEK with glass fiber filled options as well as Carbon and Teflon filled options. Formally known as Unitrex Peek. For more Info : Click Here

Polymer Industries' Densetec® LDPE Sheet is a material that's soft, flexible, and tough, even at low temperatures. Because of the fact that Densetec® LDPE has very good formability traits and is very pliable, it is an ideal material for the orthotics and prosthetics industry. Densetec® LDPE has very good chemical resistance and low moisture absorption which makes it ideal for the chemical industry. Densetec® LDPE also has exceptional environmental stress crack resistance properties.

The TPS ClearGuard® Hurricane Panels are made with super tough Polycarbonate resin (a type of plastic) that will not rust, shatter, or corrode. Our TPS ClearGuard® Hurricane Panels allow natural light to filter in during storm related power outages. With up to 85% natural light transmission, every homeowner should be sure to have a clear panel system that allows light in and visibility out. Unlike unsightly metal panels ClearGuard® Hurricane Panels, are virtually invisible when installed. The lightweight TPS ClearGuard® Hurricane Panels provide a safe and easy system with no sharp edges. The narrow widths promote easier homeowner handling and installation. Easy to install. .. Easy to store ... making them perfect for compact stacking. Fits perfectly with standard industry Tracks and Hardware.

MECHETEC® PET from Polymer Industries is a semi-crystalline polyester terephthalate (PET) polymer that exhibits excellent strength, rigidity, and is easily machined. Additionally, this material offers dimensional stability and wear resistance that meets or exceeds that of nylon or acetal. Due to it’s superior chemical resistance and food contact approvals, MECHETEC® PET stock shapes are the preferred material for components in food processing applications such as pistons, valves, feed screws, and food product forming and extrusion dies. Additionally, the low moisture absorption and low rate of thermal expansion offered by MECHETEC® PET makes it ideal for demanding applications that require close tolerance, precisely machined component parts. Formally known as Unipet PET. For more Info : Click Here

Polyslick® Rocket Plate is a 100% virgin UHMW-PE (Ultra High Molecular Weight Polyethylene) sheet product with hemispherical nodules on one side designed to reduce surface contact facilitating easier movement and rotation of heavy material in any direction. Low friction, lightweight, impact resistant, and cost effective are just some of Rocket Plate's features along with being easy to install and requiring virtually no maintenance.

Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.

Polymer Industries' Densetec® HDPE Pipe Grade is a higher molecular weight material than our standard Densetec® HDPE. The material displays improved performance characteristics in a variety of piping applications. In addition, the material is UV stabilized and ideal for use in demanding outdoor applications. It retains its properties between -220°F and 180°F and resists most chemicals. It is also NSF certified under Standard 61 to be used in potable water piping systems. Densetec® HDPE Pipe Grade can be used in a variety of applications including manhole lids and bottoms, pipe reducers, trenches, sumps, pipe flanges, pipe end caps, tanks, milled flange adapters and lifting lugs.

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

Polyslick® UHMW Rod exhibits all of the durable qualities of our Polyslick® UHMW Sheet making it perfect for the application where sheet stock is not suitable. The material is ideally suited for the manufacture of bushings, bearings, rollers, and augers as there is much less wasted material than if the material was made out of sheet stock. Polyslick® UHMW Rod is available in up to 10 inches in diameter and is available out of stock in natural virgin and black reprocessed grades.