company tower banner
Nytef Plastics Company Logo
ULTRAPOLY LUNS technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is Luns permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with anti-skid material comprised of slag.

Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)

Physical Form: Sheets

Features: Anti-Slip, Impact Resistance, Non Corrosive, Wear Resistant

Density: 932.0 - 932.0 kg/m³

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Technologies

Features & Benefits

Key Features
  • More aggressive anti-skid than Braxx.
  • Safeguards pedestrian and vehicular slip hazard areas.
  • Virtually permanent.
  • Maintenance free.
  • Installs easily over wood, concrete, steel and aluminum.
  • Will not corrode or rot.
  • Eliminates paint or tape.
  • Impact resistant.

Applications & Uses

Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Recommended Applications
  • Stair Treads.
  • Marina Gangways.
  • Wheel Chair Ramps.
  • Pedestrian Walkways.
  • Vehicular Anti-Slipping.
  • Forklift Inclines and Dock Plates.

Properties

Physical Form
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Point271°F
Coef. Of Linear Thermal Expansion8.3 x 10^-5in/in/°FASTM-D696
FlammabilityHB (1/8 inch)UL-94
Typical Properties
ValueUnitsTest Method / Conditions
Abrasion Resistance 10
Coefficient of Friction, Kineticmin. 0.75ASTM-D1894
Coefficient of Friction, Staticmin. 0.75ASTM-D1894
Density0.932g/ccASTM-D792
Durometer Hardness64Shore DASTM-D2240
Elongation at Break300%ASTM-D638
Izod Impact Srengthmin. 100KJ/m2ASTM-D4020, Method A
Tensile Strength at Yield3500psiASTM-D638
Water Absorbtion at Saturation0.01%ASTM-D570
Electrical Properties
ValueUnitsTest Method / Conditions
Dielectric Constant2.3ASTM-D150
Dielectric Strength90.3KV/mASTM-D149
Surface Resistivity1 X 10^12ohmASTM-D257
Volume Resistivity1 X 10^14ohm-cmASTM-D257