Products

OKULEN® Elast, in this combination, PE acts as wear protection while the UV-protected elastomer absorbs mechanical energy.The material combination is also used for noise reduction while filling bulk goods into silos.

OKULEN® 500-REG. black FN9000 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 500 black FN9000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500-REG. multi-colored FN9009 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® PTFE + PFA applications include sliding elements for use at high temperatures, e.g. in chemical equipment and process containment, and preforms with or without pressed metal inserts such as impellers, pump casings, disks, etc.

OKULEN® Rubber Core is a one-piece damping element; the top and bottom PE layers can vary, but the middle layer always consists of an elastomer with a Shore hardness of 40A (soft).The material is available as a panel, cut-out, or finished product.

OKULEN® PVDF black FN9496 is an unreinforced, semi-crystalline fluoropolymer with good mechanical properties and excellent chemical resistance, giving you a versatile construction material used mainly in the petrochemical, chemical, metallurgical, pharmaceutical, food and pump industries.

OKULEN® 500-REG. UV black FN9100 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 500 AST black FN9200 is a permanent conductive modified HMW-PE polymer. This material is used for applications in which it is not allowed to build up static properties. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested on representative samples by the TÜV-Nord (Germany).

OKULEN® 500 yellow FN1000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® PRO-GRIP, here the PE layer only serves as a carrier material with the UV-protected elastomer acting as a non-slip layer.The carrier material is always OK 500 coarse-multicolour FN9009 or confetti.The elastomer layers may be applied to one or both sides, and are available in varying degrees of hardness.Note that PE is known for its cold flow, and has limited application in static loads. The steel structure of a truck trailer must prevent sagging if the material is to be used as a loading floor.

OKULEN® 500 green FN6000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.