Products

OKULEN® 500 yellow FN1000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500 red FN3000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500-REG. UV black FN9100 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 500 AB blue FN5990 anti-microbial is a HMW-PE Polymer. It has excellent anti-microbial protection. The protection range which has been measured is 99,99 % against bacteria “Staphylococcus aureus ATCC6538P” and “Klebsiella pneumoniae ATCC 4352“. This grade is EU & FDA compliant for food industry.

OKULEN® 500 UV black FN9100 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 1000 UV black FN9100 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol.

OKULEN® 500-REG. black FN9000 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 500 AST black FN9200 is a permanent conductive modified HMW-PE polymer. This material is used for applications in which it is not allowed to build up static properties. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested on representative samples by the TÜV-Nord (Germany).

OKULEN® PP B - Pebble gray - FN7032 is a pebble gray basic stabilization polypropylene blockcopolymer with high melt viscosity and good low-temperature impact strength.

OKULEN® 500 black FN9000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500-REG. black multi-colored FN9005 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 1000 AST black FN9200 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol. OKULEN® 1000 has material properties that make it extremely versatile; the material is ideally suited for mechanical engineering – OKULEN® 1000 parts are used especially in plant construction and handling technology. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested onrepresentative samples by the TÜV-Nord (Germany).

OKULEN® 2000 blue FN5884 is an UHMW-PE polymer with a low coefficient of friction. It is a lining material that has been perfected to solve material flow problems.

OKULEN® PP H - Pebble gray - FN7032 is a polypropylene homopolymer, gray colored similar to RAL 7032 (pebble gray) with high melt viscosity for compression molding. The product has a high heat- and extraction stability.

OKULEN® 500-REG. green FN6000 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® PP B - natural - FN0000 is a natural basic stabilization polypropylene blockcopolymer with high melt viscosity and good low-temperature impact strength.

OKULEN® 500 green FN6000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 500 natural FN0000 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol.

OKULEN® 2000 OPV blue FN5860 is an UHMW-PE Polymer (~ 9 mio. g/mol). It has excellent gliding properties. It is used in conveyor systems with higher speeds, where a standard UHMW-PE is no longer sufficient. The friction e.g. between conveyor chain and sliding plate or that of plain bearings is greatly reduced so that the energy costs and maintenance costs are also reduced.

OKULEN® 2000 blue FN5893 is a Ultra-High-Molecular-Weight-PolyEthylene (UHMW-PE polymer). By adding of special additives it possesses a low coefficient of friction. The improved low coefficient of friction (non-stick surface) makes this material ideal for gliding applications.

OKULEN® 500-REG. multi-colored FN9009 (PE-HMW) a high molecular weight low pressure polyethylene with regenerated materials.

OKULEN® 500 blue FN5100 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol. (HMW-PE)

OKULEN® PP H - natural - FN0000 is a natural polypropylene homopolymer with high melt viscosity for compression molding. The product has a high heat- and extraction stability.

OKULEN® 1000 ESD black FN9060 is an ultra high molecular low pressure polyethylene (UHMW-PE) with a molecular weight ~ 5.000.000 g/mol.