Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Heat Transfer Fluid Type
- Product Type
- Composition
- Aromatic mixture
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Thermaflo® A combines low viscosity and exceptional thermal stability for consistent performance. The homogenous mixture of diphenyl oxide and biphenyl gives this heat transfer fluid flexibility to perform in both vapor and liquid phases. It is miscible and interchangeable with other similar high temperature thermal fluids.
- Thermaflo® A has low viscosity – 12°C (54°F) and may require tracing in colder climates because of its crystallization point.
Applications & Uses
- Markets
Properties
- Physical Form
- Appearance
- Colorless to Pale Yellow
- Typical Properties
Value | Units | Test Method / Conditions | |
Autoignition Temperature | 1.11 | °F | ASTM D-2155 |
Average Molecular Mass | 166.0 | - | - |
Boiling Range (760 mmHg) | 491 - 500 | °F | - |
Bulk Temperature Range | 60 - 750 | °F | - |
Density (20°C) | 8.82 | Ibs/gal | - |
Flash Point | 235.0 | °F | - |
Freeze Point | 54.0 | °F | - |
Kinematic Viscosity (40°C, Cs) | 2.5 | °F | - |
Kinematic Viscosity (100°C, Cs) | 0.92 | °F | - |
Maximum Film Temperature | 800.0 | °F | - |
Moisture Content | max. 200 | ppm | - |
Specific Gravity (20°C) | 1.056 | - | - |
Thermal Conductivity | 0.053 | - | - |
Total Acid Number | max. 0.05 | mg KOH/g | - |
Vapor Pressure | 45.0 | °F | - |