Products

Polyflo® 40 is a C11-C30 aromatic mixture of hydrocarbons used as a secondary plasticizer and extender oil in flexible PVC, polyurethane elastomers, rubber and epoxies.

Thermaflo® RP (Diaryl Aromatic mixture) is a recycled heat transfer fluid providing high performance in closed-loop, liquid-phase, non-pressurized hot oil systems with a bulk operating temperature range between 0°C to 350°C (32°F to 660°F). The maximum recommended film temperature is 375°C (710°F).

Thermaflo® 62 (Isopropyl & aromatic mixture) is a low vapor pressure fluid for use in indirectly heated, non-pressurized, closed loop applications.

Thermaflo® 55 (Alkyl Benzene) is a recycled heat transfer fluid consisting of a heavy Alkylbenzene mixture of compounds for use in non-pressurized/low-pressure indirect heating systems; providing efficient, dependable, uniform process heat.

Thermaflo® Q is a reutilized heat transfer fluid consisting of a mixture of Diphenylethane and Alkylated Aromatics having maximum bulk operating range of -35°C to 330°C (-30°F to 625°F). It has a maximum film temperature of 357°C (675°F).

Polyflo® 5 is a C11-C24 high flash aromatic naphtha solvent. The aromatic content of Polyflo 5 is typically min. 99%. The product has no detectable level of naphthalene at a detection limit of 500 ppm. Applications include refining, fuel, and lube additives, industrial cleaning, sealants, and as a processing fluid.

Polyflo® 20 is a C11-C30 aromatic mixture of hydrocarbons used as a secondary plasticizer and extender oil in flexible PVC, polyurethane elastomers, rubber and epoxies.

Thermaflo® 59 (Ethyl Diphenyl Ethane plus Derivatives) is a reclaimed Alkyl Aromatic designed for moderate operating hot oil systems requiring low temperature pumpability characteristics.

Thermaflo® 660 (Partially Hydrogenated Terphenyls) is a recycled, high-performance, synthetic heat transfer fluid for use in non-pressurized, indirectly heated, liquid-phase hot oil systems.

Thermaflo® A is a high performance synthetic heat transfer fluid designed to meet the demands of liquid or vapor phase systems and indirect heat transfer. Operating temperature is 12°C to 400°C (54°F to 750°F) for liquid phase systems, 257°C to 400°C (495°F to 750°F) for vapor phase systems.

Polyflo® 200 is a C11-C30 aromatic mixture of hydrocarbons used as a secondary plasticizer and extender oil in flexible PVC, polyurethane elastomers, rubber and epoxies

Polyflo® 30 is a C11-C30 aromatic mixture of hydrocarbons used as a secondary plasticizer and extender oil in flexible PVC, polyurethane elastomers, rubber and epoxies.

ORG CHEM Group SODIUM NITRITE is a aqueous solution. This material is produced in Evansville, IN and is available in drums, totes, or bulk.

Thermaflo® LH is a reclaimed, high-performance synthetic, organic heat transfer fluid for use in closed, non-pressurized forced circulation hot oil systems.

ORG CHEM Group Sulfolane - 99 is an organic solvent predominantly used as an extraction solvent for BTX or aromatic removal from hydrocarbon feed streams but is also used in sour gas sweetening, (i.e., removal of acid gasses from a natural gas stream). Due to its combination of physical and chemical properties, Sulfolane® has been used in a variety of new applications including as an extraction distillation solvent, polymer solvent, polymer plasticizer, polymerization solvent, and in electronic/electrical applications and dyestuff intermediates.

Thermaflo® J (Alkylated Aromatic) heat transfer fluid is a mixture of isomers specially formulated for lower-temperature applications in liquid phase pressurized systems.

Thermaflo® G (Diaryl and Triaryl mixture) is a recycled heat transfer fluid offered for use in liquid phase, low pressure heat transfer systems.

Thermaflo® SH (Dibenzyl Toluene isomers) is a reclaimed, high-performance synthetic, organic heat transfer fluid for use in closed, non-pressurized indirectly heated hot oil systems for operation between -5°C to 350°C (23°F to 662°F).

THERMAFLO® Flushing Fluid (TFF) is a low cost, aromatic oil, which functions as an excellent tar solvent. It is comparable in solvency to a flammable solvent such as toluene, without the safety and toxicity issues. TFF also breaks loose baked on carbon deposits, by ‘wetting’ the metal better and getting under the hard solids for removal from the hot oil system.