Products

Osterman & Company Inc. Osterlene® HD800-U is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and good balance of stiffness and impact resistance. Typical applications for HD800-U include cases, tote bins, crates and trays and open-head pails. HD800-U contains UV stabilizer for use in applications with exposure to sunlight.

Osterman & Company Inc. Osterlene® HD2000-GP is a high density, narrow molecular weight polyethylene copolymer intended for applications requiring a glossy surface finish and resonably good impact strength and rigidity.HD2000-GP is characterized by a high melt index which allows easy processing of medium to thin-walled articles. Its uses include injection molding for containers.HD2000-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HB1049 is an extra high molecular weight hexene copolymer. It has good melt strength, good rigidity, excellent stress crack resistance and excellent impact strength even at low temperatures.HB1049 is excellent for large part molding applications.Recommended applications for HB1049 include blow molding large shipping containers, agricultural chemical tanks and gasoline tanks. Extruded applications would include pallets, cattle feeders, large formed parts and boats.Osterlene HB1049 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HD0860 is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and a good balance of stiffness and impact resistance.Osterlene HD0860 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

HD050-GP is designed for blow molding applications. It may be used as a sheet extrusion thermoforming resin or a general purpose blow molding resin.

Osterman & Company Inc. Osterlene® HD070-GP exhibits low taste and odor characteristics, combined with high rigidity.Applications for HD070-GP include bottles and containers for food packaging, liquid food containers for milk, water and juices and thermoformed parts.HD070-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HD0752 is a high density polyethylene resin and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength.Applications for HD0752 include injection molding, for injection molded pails, industrial parts and other shipping containers. This product has excellent impact strength, stress crack resistance and processability. It has a very narrow molecular weight distribution.HD0752 has no slip, antiblock or processing aids.HD0752 complies with U.S. FDA 21 CFR 177.1520 (c)3.1a, Canadian HPFB No Objection, EU, No 10/2011, U.S. USP, U.S. FDA DMF.

Osterman & Company Inc. Osterlene® HB6564 is a high quality product for critical food packaging requirements.HB6564 has excellent stiffness and good stiffness properties.Suggested applications for HB6564 would include distilled water, milk, soft drink concentrate and fruit juice, etc.Osterlene HB6564 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® PPC04-SHI is a high crystallinity, excellent stiffness, high impact copolymer resin designed for injection molding, extrusion and thermoforming applications.Uses for PPC04-SHI include; crates, consumer applications, industrial applications, pallets, tool and tote boxes and toys.

Osterman & Company Inc. Osterlene® PPC30-SHINA is a high impact polypropylene copolymer designed and formulated for injection molding applications. It contains a unique combination of stabilizers, nucleators and antistat that provides an optimum balance of stiffness and cold temperature impact.PPC30-SHINA exhibits an excellent range of physical and thermodynamic properties which make it an ideal choice for critical applications in the areas of automotive, appliances and lawn and garden.Osterlene PPC30-SHINA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HD035-GP is designed for applications requiring excellent stiffness and stress crack resistant properties. It may be used as a sheet extrusion thermoforming resin or a general purpose blow molding resin.Suggested uses would include bottles and containers for bleach and detergents, personal care products and pharmaceutical packaging.HD035-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® GPPS0900 is a crystal polystyrene for both injection molding and cap layer co-extrusion.Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymer's ability to be molded with minimal stresses and fast cycles.Utilizing GPPS0900 as a cap layer in cups, plates and other consumer disposables takes advantage of this polymer's melt rheology.

EPIMAX® ABS-806HG by Osterman & Company Inc. is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

EPITEC® Nylon-273G by Osterman & Company Inc. is comprised of Polyamide 66. It is commonly used

EPITEC® PC-940FV by Osterman & Company Inc. is comprised of Polycarbonate. It is commonly used

Osterman & Company Inc. Osterlene® PPH20NA is a polypropylene homopolymer resin nucleated for faster crystallization with antistatic properties and designed for injection molding applications.Typical applications include; caps & closures, housewares, sports, opaque containers and leisure and toys.Osterlene PPH20NA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® LD02520 (-A, -SA) is designed for heavy duty film applications. Superior puncture resistance combined with excellent impact properties make this resin an ideal choice for bags used to package fertilizer, peat moss, decorative stone and agricultural and construction materials.LD02520 has been designed for excellent processability, bubble stability and good heat sealing over a wide range of extrusion conditions. Optimum properties are found at melt temperatures of 330°-430°F (165°-221°C) and blow-up ratios between 1.8:1 and 2.5:1. Drawdown to 1.5 mil (38.1 microns) is possible at commercial rates when proper extrusion techniques are used. Specific recommendations can be made only when the end use applications, required properties and processing equipment are known. For exact recommendations, contact your Osterman Sales Representative. ?Osterlene LD02520 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman ESENTTIA S.A. - Polypropylene Homopolymer Friday, June 14, 2019 General Information

EPITEC® PC-910FH by Osterman & Company Inc. is comprised of Polycarbonate. It is commonly used

Osterman & Company Inc. Osterlene® PPC20-2.7 is a high crystallinity, high impact copolymer resin with medium melt flow rate and excellent processing attributes. It is designed for injection molded small and large appliance parts.Features of PPC20-2.7 include fast molding cycle, good processability, high stiffness, good heat aging resistance, high impact resistance and low warpage.Suggested uses include appliances, crates, packaging, consumer applications, industrial applications and tool/tote boxes.Osterlene PPC20-2.7 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

EPITEC® ABS-803 by Osterman & Company Inc. is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Osterlene® LD250 by Osterman & Company Inc. is comprised of Low Density Polyethylene. It is commonly used

Osterman & Company Inc. Osterlene® PPR02CL is a random polypropylene that is clarified with high clarity and gloss, low odor and taste transfer, and good regrind stability.Suggested uses for PPR02CL includes, extrusion, blow molding and thermoforming where enhanced clarity is desired.Osterlene PPR02CL meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

EPITEC® PC-6910F by Osterman & Company Inc. is comprised of Polycarbonate. It is commonly used

LD3500 is designed for applications requiring clarity, strength and stiffness.LD3500 exhibits good processability and clarity. LDPE injection molding resins for closures, caps and housewares.

EPITEC® PC/ABS-308 by Osterman & Company Inc. is comprised of Acrylonitrile Butadiene Styrene and Polycarbonate. It is commonly used

Osterman & Company Inc. Osterlene® LD6521 is a general purpose LDPE grade resin. It has good toughness and stiffness and is easy to process.Applications for LD6521 include domestic housewares, food containers, rigid medium sized moldings, film applications, non-abrasive packaging applications.Osterlene LD6521 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

EPITEC® NYLON-265 by Osterman & Company Inc. is comprised of Polyamide (unspecified). It is commonly used

HIPS2.63.6 is a super high impact polystyrene designed specifically for sheet extrusion and thermoforming.

Osterman & Company Inc. Osterlene® LLB5000 exhibits excellent flow and impact with good stiffness.Typical uses for LLB5000 would include injection molding; lids, industrial containers, housewares and master batch.LLB5000 meets the requirements of the Food and Drug Administration regulation, 21 CFR 1 77.1 520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food..." Specific limitations or conditions of use may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® PPH35F is used in food packaging film, heavy duty packaging, absorbtion & filtration, filament yarn, furniture & buildings, IBCs, geotextile & agriculture, hygiene nonwoven, protective clothes, wipes/tissues.Osterlene PPH35F is a very high melt flow polypropylene homopolymer resin designed for fiber spinning.Osterlene PPH35F meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HD1851 is an injection molding resin that has good processability and ESCR.Applications for HD1851 include toys, containers and housewares.HD1851 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® HD030-AS is a blow molding grade high density polyethylene copolymer containging and antistat additive. It provides a good balance of stiffnes and stress-crack resistance.Applications for HD030-AS include drainage pipes, food packaging, household and industrial chemical containers, pharmaceutical packaging, thermoformed parts, and thin gage sheet.This product contains antistatic and thermal stabilizer.

Osterman & Company Inc. Osterlene® PPC10-SHI is a high impact copolymer designed for consumer and industrial applications. Features include good colorability, good dimensional stability, good mold release and thermal stability, medium flow and nucleated.Applications include containers, industrial applications and pallets.

Osterman & Company Inc. Osterlene® PPH35NA is a nucleated, antistatic polypropylene with very good mold release.Suggested uses for PPH35NA include large part injection molding, fast-cycle injection molding, disposable drinkware and hospitalware.Osterlene PPH35NA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Osterman & Company Inc. Osterlene® PPC30-3.2 is a high crystallinity, medium impact copolymer resin with high melt flow rate and good processing attributes. It is designed for injection molded automotive interior applications and large appliance parts.Features of this resin include balanced stiffness/toughness, high impact resistance, nucleated, good stiffness, impact modified and slip.

Osterman & Company Inc. Osterlene® LLH1018 (-A, -SA) is a general purpose film grade linear low density made using gas-phase tech nology. The resin exhibits excellent toughness and strength when drawn down to thin gages.Suggested applications for this resin include its use as a blending resin, for industrial packaging, co-extrusion, industrial liners and garment bags.Osterlene LLH1018 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.