Products

EXOdis PC40A is a polymer anionic dispersant intended for paint products. It is supplied in the form of 40% aqueous solution of ammonium salt of polyacrylic acid. The product is a clear or lightly murky yellow liquid.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

Rostabil TTDP is a specialist additive for plastics used as a process stabilizer. It is available in the form of a homogeneous liquid with a characteristic, delicate fragrance. It prevents degradation of polymer materials during processing. Provides thermal protection of polymers, eliminating the effect of yellowing of finished products. Strengthens the color stability of materials containing pigments and provides transparency of non-pigmented products.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

EXOdis PC40 is an anionic polymer dispersant intended for paint products. It is provided in the form of 40% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

SULFOROKAnol L270/1A (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is based mainly on raw material of natural origin. It has the consistency of a liquid paste, colorless to light yellow. The product is available in concentrated form as a 70% aqueous solution, which translates into a reduction in transport and storage costs. The product shows complete solubility even in hard water. It does not contain preservatives.

SULFOROKAnol L327 (Sodium C12-15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Pareth Sulfate), based on synthetic alcohol. The product comes in the form of a 27% water solution, from colorless to light yellow. SULFOROKAnol L327 is preserved with the MIT / CIT derivative, which ensures its microbiological purity.

ROKAnol® L30A is a non-ionic surfactant mainly used as an emulsifier in the emulsion polymerization process. The product is in the form of white wax with a solidification point of approximately 45°C. During the synthesis stage, ROKAnol® L30A emulsifies the monomer and stabilizes the particles of the resulting polymer, preventing coagulation of the resulting dispersion.

Roflam B7 is a halogen-free flame retardant in the form of a colorless liquid with low dynamic viscosity. Due to its excellent compatibility with many liquid raw materials, it is successfully used in polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. Among the products belonging to the group of triaryl phosphoric esters, it is distinguished by being non-lethal to human health.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

PCC Chemax Dodecylphenol is a dense, viscous, light yellow liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly para-dodecylphenol. Dodecylphenol is difficult to dissolve in water and is very soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons.

ROKwin 80 is a non-ionic surfactant, a derivative of sorbitan and oleic acid. It is obtained in the condensation reaction of sorbitol with oleic acid. It is produced in the form of a liquid from yellow to dark brown. It does not dissolve in water.

PCC Chemax Monochloroacetic acid 100% technical, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

ROKAnol® IT20 is a non-ionic surfactant with a wide application range. At room temperature, the product is a white to light yellow solid. The main application of ROKAnol® IT20 is the emulsion polymerization process in which it is used as an emulsifier and dispersion stabilizer. It can be used in the production of most polymer dispersions, including acrylic and styrene acrylic dispersions, as well as vinyl acetate homo- and copolymers.

Roflam F9 is a specialized phosphate ester used as an additive flame retardant. The product is halogen-free, thus, it does not release toxic gasses during the combustion process. The use of a flame retardant leads to the formation of a charred layer on the surface of the material, which inhibits the spread of the flame. In order to enhance the flame retarding effect, Roflam F9 can be used together with inorganic flame retardants in the powder form with which it has a synergistic effect.

Roflam F6 is a halogen-free solution for efficient flame retardation in plastics. The additive provides a high class of fire resistance without adversely affecting the mechanical properties of the finished product. During the combustion process, the presence of a flame retardant promotes the formation of a less flammable, charred coating that acts as a barrier between the material and the flame. The use of Roflam F6 additive together with inorganic flame retardants in powder form increases the fire resistance profile through a synergistic effect.

EXOdis PC950 is a mixture of non-ionic surfactants for use in the production of paints and pigment pastes. It is a clear yellow liquid. The commercial product is available in the form of an aqueous solution with a concentration of 90%.

POLIkol 6000 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax flakes. The solidification point of the product is 52-58 °C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

Roflam 6 is a reactive halogen-free flame retardant intended for plastics. The product inhibits the solid-phase combustion process, creating on the surface of the material a charred layer that cuts off the access of oxygen from the environment and thus reduces the burning process. Due to the synergy of phosphorus-nitrogen (the product contains both elements embedded in the chemical structure), the created intumescent coatings provide extremely effective protection that allows compliance with rigorous criteria regarding flammability.

Rokopol® iCan 2432 is a specialist, base polyether polyol dedicated to production of one-component high-efficiency foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 145-160 mgKOH/g, and dynamic viscosity within the range of 150-250 mPas at temp. 25°C.

POLIkol 6000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is 52-58°C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

ROKAmer 1010/50 belongs to the group of non-ionic block copolymers of ethylene oxide and propylene oxide (ROKAmers). The product has a content of about 50% of the active substance and has the form of a clear, light yellow liquid.

PCC Chemax Monochloroacetic acid 100% H-P, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated .

Rostabil TNF is a specialist additive for plastics used as a process stabilizer. It prevents degradation of polymer materials during processing, strengthens the color stability of materials containing pigments and provides transparency to non-pigmented products.

Rostabil TDP is a trialkyl phosphite used as a specialist additive for plastics. Occurring in the form of a homogeneous and clear liquid, plays the role of a thermal and process stabilizer successfully used in transparent products.

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

ROKAnol® NB8W belongs to non-ionic surfactants (ethoxylated fatty alcohols). The product is based on a synthetic C9-C16 alcohol. High surface activity enables the use of this product in detergents and cleaning agents. The commercial product contains approximately 85% of the active substance. It is a clear or turbid liquid with a tendency to delaminate over time, solidifying at a temperature of about -5°C. ROKAnol® NB8W has hydrophilic properties, which makes it well soluble in water and low aliphatic alcohols.

Roflam P (TCPP) is a widely used flame retardant in the plastics industry, especially in polyurethane processing. It is one of the most effective flame retardants due to the presence of chlorine and phosphorus in the chemical structure. In addition, due to the synergy of Roflam P with flame retardants, such as antimony trioxide and melamine, materials with very high fire resistance can be obtained.

PCC Chemax Monochloroacetic acid 80% U-P is a product of the highest purity available, in which the DCAA content does not exceed 90 ppm. It is intended for use primarily in pharmacy in processes where the DCAA content is critical to the quality of the final product. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is easily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

ROKAdis 900 is an effective wetting and dispersing agent used in paint production and in the construction industry. It is produced as a colorless or light yellow liquid. ROKAdis 900 is intended for the formulation of pigment concentrates based on inorganic pigments, where its excellent dispersion and wetting properties are an important advantage.

PCC Chemax Monochloroacetic acid 80% H-P is a high purity product characterized by DCAA levels suitable for most processes where both color (colorless, clear) and low levels of pollution (DCAA <500ppm) are critical. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

EXOdis PC340 is an anionic wetting and dispersing agent intended for creating water-pigment concentrates. The commercial product is provided in the form of clear light yellow or yellow liquid. The product is available as aqueous solution of concentration of around 38%. The preparation does not contain any volatile organic compounds (“VOCs”) or alkylphenol ethoxylates (APEO-free).

PCC Chemax Dodecylphenol Premium is a dense, viscous, light yellow liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly para-dodecylphenol. Dodecylphenol Premium is characterized by significantly reduced amount of light alkylphenols, including nonylphenol. Product has also improved color compared to standard quality dodecylphenol. Dodecylphenol Premium is difficult to dissolve in water and is very soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons.

Roflam F5 is a phosphor flame retardant that provides a high fire resistance class of plastics. During the combustion process, the product works in a solid phase, creating on the surface of the material a charred layer inhibiting the spread of the flame. The flame retardant is a halogen-free solution, therefore, no toxic gasses such as HCl or HBr are emitted during the gas-phase combustion process.

Roflam B7V is a halogen-free phosphor flame retardant in the form of a colorless liquid. Due to its low dynamic viscosity and very good compatibility with many raw materials, it is successfully used, among others in highly filled polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. In comparison to other flame retardants belonging to the group of aryl phosphoric esters, it is characterized by a lack of classification for the threat to human health, as well as a low content of volatile organic compounds, including free phenol.

Dichloropropane (DCP) is a clear, colorless liquid with no mechanical impurities with a characteristic odor. Dichloropropane is obtained in the production of propylene oxide, then distilled for several times. The improvement of the production process allowed the increase of the purity of DCP from min. 97.5% to min. 99%. As a result, the product has gained greater recognition within overseas markets.