Products

ROKAnol NL5 is a non-ionic surfactant from the group of ethoxylated alcohols (INCI name: C9-11 Pareth-5). The product belongs to the ROKAnol NL series based on C9-C11 synthetic alcohol. The high surface activity of these compounds is used in detergents and cleaning agents. The commercial product contains about 100% of the active substance and takes the form of a clear or turbid liquid, solidifying at a temperature below 0°C.

SULFOROKAnol L270/1 (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). It is based mainly on raw material of natural origin. The product is available as a liquid paste, colorless to light yellow, and has a concentrated form - a 70% aqueous solution, which reduces transport and storage costs. The product does not contain any preservatives. SULFOROKAnol L270/1 shows complete solubility even in hard water.

ABSNa 50 belongs to the group of anionic surfactants and is the sodium salt of alkyl benzene sulfonic acid with a concentration of 50%. The product is in the form of concentrated paste, which translates into economic benefits, for example in the case of using the product for the production of washing powders.

EXOdis PC40A is a polymer anionic dispersant intended for paint products. It is supplied in the form of 40% aqueous solution of ammonium salt of polyacrylic acid. The product is a clear or lightly murky yellow liquid.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

EXOdis PC40 is an anionic polymer dispersant intended for paint products. It is provided in the form of 40% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

The nonionic surfactant used as a semi-finished product of receiving textile preparation.

ABS acid is an anionic surfactant of the alkylbenzene sulfonate group, in acid form. Due to its acidic form, the product is available with an active content of more than 96%. ABS acid is a light brown to dark brown liquid. Thanks to the concentrated form, it is very cost-effective in terms of reducing transport costs.

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

Roflam B7 is a halogen-free flame retardant in the form of a colorless liquid with low dynamic viscosity. Due to its excellent compatibility with many liquid raw materials, it is successfully used in polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. Among the products belonging to the group of triaryl phosphoric esters, it is distinguished by being non-lethal to human health.

Rodys O is the sodium salt of naphthalenesulfonic acid polycondensates with formaldehyde, offered as a 40% aqueous solution. The technology of Rodys O production allows to obtain a product containing trace amounts of free formaldehyde and naphthalene. As a result, it neither has an environmental classification, nor does it affect the content of free aromatic hydrocarbons in the products for which it is used. Among the Rodys product series, Rodys O has a high degree of polymerization.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

Rokopol® M6000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 27-29 mgKOH/g, and its dynamic viscosity is within the range of 1050-1250 mPas at temp. 25°C.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

SULFOROKnol L270-1 MB is a derivative of palm kernel oil from certified crops. This product is RSPO Mass Balance certified SULFOROKAnol L270/1 MB is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). It is based mainly on raw material of natural origin. The product is available as a liquid paste, colorless to light yellow, and has a concentrated form - a 70% aqueous solution, which reduces transport and storage costs. The product does not contain any preservatives. SULFOROKAnol L270/1 MB shows complete solubility even in hard water.

ROKAnol H5 is a non-ionic surfactant from the group of ethoxylated alcohols, and is classified as a product based on low molecular weight alcohol. The product contains approx. 100% of active substance and is a clear or cloudy liquid that solidifies at temperatures below -20°C. ROKAnol® H5 has high water solubility. All these features facilitate handling of the product.

ROKAnol NL6W / 95 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols (INCI name: C9-11 Pareth-6). The product belongs to the ROKAnol NL series based on C9-C11 synthetic alcohol. High surface activity allows them to be used mainly in detergents and cleaning agents.

PCC Chemax Hydrochloric acid for food grade industry 33% is a chemical compound that is an aqueous solution of hydrogen chloride gas. It has strong corrosive properties, a strong, irritating odor, and colorless to pale yellow. Hydrochloric acid food grade is produced by the direct synthesis of elements - burning of chlorine in hydrogen and then the absorption in the water of the resulting hydrogen chloride. Hydrochloric acid is supplied to the market at a concentration of 33% to 35.5%.

ROKAnol® L30A is a non-ionic surfactant mainly used as an emulsifier in the emulsion polymerization process. The product is in the form of white wax with a solidification point of approximately 45°C. During the synthesis stage, ROKAnol® L30A emulsifies the monomer and stabilizes the particles of the resulting polymer, preventing coagulation of the resulting dispersion.

PCC Chemax ABSNa 30 (Sodium Dodecylobenzene Sulfonate) is 30% sodium alkylbenzenesulphonic acid salt and belongs to the group of anionic surfactants. This product is in the form of a clear or turbid liquid of low color. In comparison with a similar product - ABSNa 30 - the product maintains a liquid form with low viscosity at room temperature, which significantly facilitates its dosing, pumping and has a positive effect on product stability also in winter.

SULFOROKAnol L270/1A (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is based mainly on raw material of natural origin. It has the consistency of a liquid paste, colorless to light yellow. The product is available in concentrated form as a 70% aqueous solution, which translates into a reduction in transport and storage costs. The product shows complete solubility even in hard water. It does not contain preservatives.

PCC Chemax Nonylphenol is a colorless, viscous liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly p-nonylphenol. Nonylphenol is soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons and difficult soluble in water.

PCC Chemax Dodecylphenol is a dense, viscous, light yellow liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly para-dodecylphenol. Dodecylphenol is difficult to dissolve in water and is very soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons.

ROKAfenol N3 (Nonoxynol-3) is a non-ionic surfactant belonging to the ethoxylated nonylphenols (INCI name: Nonoxynol-3). It is an oily liquid with a color of up to 70 HU and a freezing point of approximately 0°C. The cloud point of this product for the butyl glycol/water solution is in the range of 25-30°C and the active substance content is approximately 100%. It is sparingly soluble in water and forms emulsions.

ROKAmer 2950 belongs to the group of nonionic block copolymers of ethylene oxide and propylene oxide (ROKAmers). ROKAmer 2950 is one of the products with low-foaming and anti-foaming properties, which is their main feature. It is dedicated for professional detergents for institutional and industrial cleaning as well as for some industrial processes.

ROKAnol® K18 (Cetoleth-18) is a non-ionic surfactant that belongs to the group of ethoxylated fatty alcohols (INCI name: Cetoleth-18). The product is manufactured on the basis of natural raw materials. ROKAnol® K18 contains about 100% of the active substance. Takes the form of a wax or paste with a max. Iodine Color Value of 10 and a freezing point close to 35°C.

POLIkol 300 (PEG-6)belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 300). The product is a colorless liquid well soluble in water, with a relatively low viscosity and freezing point below 0 °C. It is characterized by good alkali resistance and strong hygroscopic properties. In addition, it exhibits excellent dissolution capacity of the active ingredients.

Roflam B7V is a halogen-free phosphor flame retardant in the form of a colorless liquid. Due to its low dynamic viscosity and very good compatibility with many raw materials, it is successfully used, among others in highly filled polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. In comparison to other flame retardants belonging to the group of aryl phosphoric esters, it is characterized by a lack of classification for the threat to human health, as well as a low content of volatile organic compounds, including free phenol.

POLIkol 6000 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax flakes. The solidification point of the product is 52-58 °C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

Roflam P (TCPP) is a widely used flame retardant in the plastics industry, especially in polyurethane processing. It is one of the most effective flame retardants due to the presence of chlorine and phosphorus in the chemical structure. In addition, due to the synergy of Roflam P with flame retardants, such as antimony trioxide and melamine, materials with very high fire resistance can be obtained.

Dichloropropane (DCP) is a clear, colorless liquid with no mechanical impurities with a characteristic odor. Dichloropropane is obtained in the production of propylene oxide, then distilled for several times. The improvement of the production process allowed the increase of the purity of DCP from min. 97.5% to min. 99%. As a result, the product has gained greater recognition within overseas markets.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

ROKAmer 1000 belongs to the group of non-ionic surfactants (block copolymers of ethylene oxide and propylene oxide, i.e. ROKAmers). The product is a polymer with a specific, double-action structure, which means that it has two hydrophilic groups. This feature distinguishes the group of ROKAmers from other non-ionic surfactants, and determines their properties. ROKAmer 1000 is one of the products with anti-foaming properties. It is dedicated to professional detergents for industrial and institutional cleaning, as well as for some industrial processes.

PCC Chemax Monochloroacetic acid 80% U-P is a product of the highest purity available, in which the DCAA content does not exceed 90 ppm. It is intended for use primarily in pharmacy in processes where the DCAA content is critical to the quality of the final product. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is easily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

EXOdis PC340 is an anionic wetting and dispersing agent intended for creating water-pigment concentrates. The commercial product is provided in the form of clear light yellow or yellow liquid. The product is available as aqueous solution of concentration of around 38%. The preparation does not contain any volatile organic compounds (“VOCs”) or alkylphenol ethoxylates (APEO-free).