PCI Group

ASAFAMA is a highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. In addition to the benefits listed, ASAFAMA will also enhance the application defoaming properties of your coating.

APACA is a modified dimethyl polysiloxane co-polymer solution. It will help in reducing surface defects by altering the surface tension of the coating and for use in water-borne and water-reducible products.

ASAFA is a unique blend of a dimethyl silicone and refined naphthenic base oil blend. Designed for use in conventional systems: acrylic resins, alkyds, polyamide, polyester and urethane.

WBWADA-60 is a unique blend of a functional capped amine with tall oil fatty acid. The resulting product is a triangular shaped wetting agent with high efficiency toward alkaline based pigments. The key to the utilization is to maintain maximum mobility of the grind paste during initial incorporation of pigment. Resin-free grinds should utilize some co-solvent if possible to improve dispersion quality. Grinding in non-neutralized resin and co-solvent at the lowest resin solids as possible, provides the most suitable grinding medium. Continue to add pigment until viscosity reaches 100-135 KU at 100-130°F. Stabilization with neturalized resin after achieving the grind specification will help to avoid pigment shocking. The order of pigment addition should be primary colors and high oil absorption pigments followed by extenders and rheology modifiers. Systems include: Solution acrylics, polyesters, alkyds and epoxies.

RAMA is a recoatable, carefully calculated blend of Alkyl-Aryl modified silicones designed to improve mar resistance without the standard recoat problems of common silicones. Manufactured for use in virtually all solvent-borne systems.

CHEM-REZ A-1050 is a poly vinyl ethyl isoburyl ether solution at 50% solids in 150 Solvent. Recommended for use in virtually all conventional and high solid coating systems..

FCABA 2 is a blend of silicone and organic acid esters. Designed for use in most non aqueous based coating systems, adhesives and inks. Prevents bubbles, and foam in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications.

AMA is dimethyl silicone designed to improve mar resistance and reduce surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane.

ASASWA is a highly modified reactive polyamide resin solution that is designed for: acid-catalyzed, alkyds (short, med., long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems.