Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Rinsability
- Excellent
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Applications
- Use Procedures
Detar 10 is particularly stable and can be used with concentrations ranging from 1% to 3% and at temperatures of up to 50°C, depending on the difficulty of the treatment.
For separation systems, the characteristics of the membranes often impose operative limits on the regeneration process. Therefore, the concentration conditions, pH and usage temperature of Detar 10 must comply with the limits dictated by the membrane manufacturer. For each specific separation system using membranes, ask the Assistance Service for detailed usage procedures; for other separation systems (micro, ultra, nano or RO), the Perdomini-IOC Assistance Service can create personalized procedures.
Properties
- Physical Form
- Appearance
- Clear Liquid
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Boiling point | min. 100 | °C | - |
Relative Density | 1.30 - 1.45 | kg/l | - |
pH Value (1% Solution, 25°C Water 0°F) | 1.3 - 1.4 | - | - |
Technical Details & Test Data
- Optimized for Separation Membranes
The maintenance of work performance in the long term is a determining factor when assessing the cost efficiency of a membrane separation system.
Regeneration plays an essential role in achieving this result: for this reason, extremely precise and specific management procedures are developed, along with increasingly specialized chemical formulas. Detar 10 is the result of development aimed at managing membrane separation systems, completing the primary cleaning process for organic material. Above all in OenoFlowTM systems, which are required to operate in wildly differing conditions and be regenerated with water of varying hardness and composition, Detar 10 has demonstrated that it contributes significantly to the maintenance of the overall performance of the system over time.
- Compatibility
In normal usage conditions, Detar 10 is compatible with stainless steel; it can cause corrosion phenomena on copper, brass and mild steel.
It is not suitable for use with aluminum. Detar 10 is also extremely compatible with membrane filters, whether polymeric or not. For more specific compatibility information, contact the Perdomini-IOC Assistance Service or the membrane manufacturer if different.
- Completion of Detar Flow and Detar 8 action
The periodic descaling action of Detar 10 is the technical completion of the cleaning procedures of organic material carried out with Detar Flow with or without the successive potentiating phase with Detar 8, a detergent with a strong oxidizing effect.
Safety & Health
- Hazard Labelling
The product is classed as highly corrosive (symbol C)and contains nitric acid (25-35%).
Consult the relative safety sheet before handling the product.
Packaging & Availability
- Packaging Type
- Pack Sizes
- cod. 252401 - 10 kg canisters
- cod. 252422 - 250 kg barrels
- cod. 252412 - 25 kg canisters
Storage & Handling
- Storage
Store in a cool, well-ventilated place. Frost sensitive. Storage temperature between +5°C and 30°C. Do not put the product back into the storage container after it has been taken out. Avoid contact with foreign matter, especially if it is caustic and/or contains chlorine. Close containers carefully again after use.