Products

Cel-Span® Purge 388 is a transition purge that contains several proprietary additives that are essential in the cleansing cycle of high temperatures and lower melting polyolefins. Temperatures above 500 °F may cause material to smoke. Cel-Span® Purge 388 can be used directly without any mixing necessary to clean most plastic equipment during color and resin changes. The unique additives and resin system in Cel-Span® Purge 388 makes it possible to cleanse color resins in less time, in most resin applications.

Cel-Span® Purge 300 contains several proprietary additives that are essential in the cleansing process of high temperatures and lower melting polyolefins. Cel-Span® Purge 300 was created to be the least cost prohibitive cleansing compound on the market today. Cel-Span® Purge 300 can be used directly without any mixing necessary to clean most plastics equipment during color and resin changes. The unique additives and resin system in Cel-Span® Purge 300, makes it possible to purge color resins like Polyolefins, A.B.S., Styrenics, and HDPE, as well as high temperatures up to 600°F.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cel-Span® UVS 717 is a (HALS) concentrate containing a stabilizer package for injection blow molding, extrusion and film applications for polyethylene. Hindered Amine Light stabilizers are the most effective light stabilizers for polyolefins. HALS is extremely efficient because these special additives continuously repopulate themselves during the UV stabilization process.

Cel-Span® FR 680 is a highly loaded 80% concentrate flame retardant tailored for a variety of applications including injection molding and sheet extrusion. Cel-Span® FR 680 was designed to be a cost effective retardant made for polyethylene requirements including the Boston Fire Department Test and the NFPA – 701 small scale test. The use of Cel-Span® FR 680 will result in excellent flame retardancy to pass several flammability requirements. Flame testing has shown that recommended levels between 8% - 25% are intended as guidelines, but optimization is necessary for each application because of the differences between equipment, resin systems, additives and flame retardancy requirements.

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Cel-Span® Purge 300FG contains several proprietary additives plus short-strand fiberglass that are essential in the cleansing process of high temperatures as well as lower melting polyolefins. Cel-Span® Purge 300FG was also created to be the least cost prohibitive glass filled cleansing compound on the market. Cel-Span® Purge 300FG can be used directly without any mixing necessary to clean most plastic equipment during color and resin changes. The unique additives and resin system in Cel-Span® Purge 300FG, makes it possible to purge color resins like Polyolefins, A.B.S., Styrenics as well as PC and Nylon in less time and with less smoke than most cleansing compounds on the market.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Cel-Span® Process Aid 701 is a molecular concentrate used as a replacement for the traditional metal halides for stabilization of Nylons at high temperatures. This product is used at 1% - 3% active level depending on the type of compound and processing conditions. Cel-Span® Process Aid 701 also provides gloss, ozone, and bleach resistance to nylon fibers, without the use of metal halide stabilizers.

Cel-Span® Purge 300HT-FG contains several proprietary additives that are essential in the purging process of high temperature resins and was created to be the least cost prohibitive high temperature purge compound on the market today. Cel-Span® Purge 300HT-FG can be used directly without any mixing necessary to clean most plastic equipment during color, and resin changes. The unique additives in Cel-Span® Purge 300HT, makes it possible to purge colors and degradation in less time than other purging compounds.

Cel-Span® Purge 388FG is a transition purge that contains long and short strand fiber glass in addition to several proprietary additives that are essential in the cleansing cycle of high temperatures and lower melting polyolefins. Temperatures above 500°F may cause material to smoke. Cel-Span® Purge 388FG can be used directly without any mixing necessary to clean most plastics equipment during color and resin changes. The unique additives and resin system in Cel-Span® Purge 388FG make it possible to cleanse color resins in less time, in most resin applications.

Cel-Span® FR 611 is a pelletized antimony and brominated concentrate that meets stringent flammability requirements defined by industry standards. Cel-Span® FR 611 is recommended for electrical sockets, timers, and light fixtures plus other applications where a UL rating is required.

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown and cast extrusion, injection, compounding, and pipe applications caused by surface moisture or incorporated into the resin during processing. CelSpan® Process Aid 305 contains a very effective additive that chemically traps water to eliminate moisture. This product can be used to eliminate moisture in high temperature engineering resins such as nylon and is utilized by metering in at 2% - 5% depending on the level of moisture.

Cel-Span® Process Aid 705 is a product recommended as a replacement for the traditional phenolic and hindered amine combination for the thermal and ultraviolet stabilization of polyester resins during high temperature processing. Cel-Span® Process Aid 705 enhances the process window of Polyester and PET resins. In addition, this product maintains the IV (Intinsic Viscosity) of Polyester and PET resins coupled with excellent UV stability. Cel-Span® Process Aid 705 also provides protection to caustic environment and bleach resistance to Polyester and PET resins with both bottle and fiber grade products. It is important that this product be used at 2% - 3% with the Polyester or PET resin before the fabrication or molding process to take advantage of the excellent properties of the unique masterbatch. It will insure that the polyester resin is protected through the molding and life cycle of the parts

Cel-Span® CFA 844 is a highly loaded 80% active endothermic foaming agent formulated for applications with high gas requirements. Cel-Span® CFA 844 concentrate releases carbon dioxide gas upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, a color common to endothermic chemical foaming agents.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

Cel-Span® S 310 is a compounded antioxidant concentrate in HDPE & LLDPE blends to provide thermal stabilization to polymers at high temperatures and during routine maintenance shut-down procedures. Cel-Span® S 310 is an effective shut down stabilizer for all polyolefin resins. It is used to protect these materials from thermal degradation during exposure to processing temperatures maximizing the inherent physical properties of the natural resins. When used at a 5-10% level, Cel-Span® S 310 can be left in extruders, dies, and other process equipment during routine maintenance “shut down and start up” procedures, to prevent unwanted polymer degradation, and help keep the process equipment clean and free of black specs and degradation.

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.