SLOVAMID 66 GF 15 GB 25 TS

Identification & Functionality

Additives Included

Heat Stabilizer

Chemical Family

Polyamides

Fillers Included

Glass Bead,

Glass Fiber

Polymer Name

Polyamide 66 (PA 66)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Heat Stabilized

Applications & Uses

Markets

Agriculture & Feed,

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Agriculture & Feed — Agricultural Films

Pipes & Hoses

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Cooling & Climate,

Fuel Systems

Building & Construction — Building Materials

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Other Industrial Applications

Electrical & Electronics — Parts & Components

Other Parts & Components

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Piping,

Sporting Goods,

Valve Parts,

Valves

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength	125	MPa	ISO 527
Tensile Modulus	7350	MPa	STN EN ISO 527-2
Flexural Strength	225	MPa	ASTM D 790
Flexural Modulus	5800	MPa	ASTM D 790
Charpy Notched Impact Strength (23°C)	4	kJ/m2	ISO 179/1eA
Charpy Notched Impact Strength (-20°C)	2	kJ/m2	ISO 179/1eA
Charpy Impact Strength (23°C)	35	kJ/m2	ISO 179/1eU
Charpy Impact Strength (-20°C)	32	kJ/m2	STN EN ISO 179
Elongation	3	%	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Melt Mass Flow Rate - MFR (275°C/0.325 kg)	1	g/10 min	STN EN ISO 1133
Density	1.45	g/cm3	STANDARD ISO 1183
Water Content	0.15	%	STN EN ISO 3344

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature - HDT	242	°C	STN EN ISO 75-2 (A)
Melting Temperature (DSC)	260	°C	STN EN ISO 11357-1
Vicat Softening Temperature (B)	251	°C	STN EN ISO 306

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity	1.00E+14	ohm	IEC 60093
Electric Strength	85	kV/mm	STN EN 60243-2
Comparative Tracking Index - CTI (A)	500	V	STN EN 60112
Volume Resistivity	1.0e+15	ohm.m	ASTM D 257

Flammability

	Value	Units	Test Method / Conditions
Glow Wire Test (3 mm)	650	°C	STN EN 60695-2-12
Flammability	HB	-	UL 94

Processing Parameters

	Value	Units	Test Method / Conditions
Mold Temperature Range	70 - 80	°C	--
Drying: Temperature/Time	80/4	°C/h	--
Manufacturing Shrinkage - length/width	0.42/0.53	%	STN EN ISO 294-4
Injection Pressure	70 - 120	MPa	--
Melt Temperature Range	280 - 300	°C	--