Plastics Engineering Company 06582 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Reinforcement Material: Glass Fibers
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Excellent Mechanical Strength,
Excellent Surface Hardness,
Heat Resistance,
High Tensile Strength,
Two-Stage,
Wear Resistant

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Industrial,
Printing & Packaging
Applications: Automotive & Transportation — Automotive
Chassis & Brake,
Powertrain & UTH
Building & Construction — Building Materials
Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Industrial — Military & Defense
Advanced Materials
Industrial — Oil, Gas & Mining
Exploration & Upstream
Printing & Packaging — Packaging
Healthcare Packaging
Electrical & Electronics — Parts & Components
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Automotive & Transportation — Transportation
Aerospace & Aviation,
Commercial
Composites End Use: Aerospace Applications,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Injection Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.66	g/cm³	ASTM D1895
Arc Resistance	134	sec	ASTM D495
Coefficient of Thermal Expansion	4.4e-05	per °C	ASTM E831
Comparative Tracking Index	189	V	ASTM D3638
Compressive Strength	115	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	233	°C	ASTM D648
Dielectric Strength (Short Time)	13.1	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.085	—	ASTM D150
Flexural Modulus	8439	MPa	ASTM D790
Flexural Strength	88	MPa	ASTM D790
Heat Resistance	244	°C	ASTM D794
Impact Strength (Drop Ball)	281	J/m	Plenco
Impact Strength (Notched, Charpy)	33	J/m	ASTM D256
Impact Strength (Notched, Izod)	38.8	J/m	ASTM D256
Mold Shrinkage *	0.0025	m/m	ASTM D6289
Oxygen Index	36.4	%	ASTM D2863
Permittivity (at 1MHz)	5.5	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.13	%	ASTM D6289
Rockwell Hardness	42	E-Scale	ASTM D785
Specific Gravity	1.59	—	ASTM D792
Tensile Elongation	0.8	%	ASTM D638
Tensile Modulus	9392	MPa	ASTM D638
Tensile Strength	55	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.44	W/m/°C	ASTM E1461
UL Flammability (at 6mm)	V-0	—	UL 94
Volume Resistivity	640000000000	ohm·cm	ASTM D257
Water Absorption	0.17	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.65	g/cm³	ASTM D1895
Arc Resistance	120	sec	ASTM D495
Coefficient of Thermal Expansion	4.4e-05	per °C	ASTM E831
Comparative Tracking Index	175	V	ASTM D3638
Compressive Strength	157	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	245	°C	ASTM D648
Dielectric Strength (Short Time)	13.2	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.077	—	ASTM D150
Flexural Modulus	8973	MPa	ASTM D790
Flexural Strength	115.4	MPa	ASTM D790
Heat Resistance	233	°C	ASTM D794
Impact Strength (Drop Ball)	296	J/m	Plenco
Impact Strength (Notched, Charpy)	45.5	J/m	ASTM D256
Impact Strength (Notched, Izod)	47.3	J/m	ASTM D256
Mold Shrinkage *	0.0011	m/m	ASTM D6289
Oxygen Index	36.4	%	ASTM D2863
Permittivity (at 1MHz)	5.8	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.07	%	ASTM D6289
Rockwell Hardness	45	E-Scale	ASTM D785
Specific Gravity	1.6	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	9963	MPa	ASTM D638
Tensile Strength	74	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.44	W/m/°C	ASTM E1461
UL Flammability (at 6mm)	V-0	—	UL 94
Volume Resistivity	630000000000	ohm·cm	ASTM D257
Water Absorption	0.15	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS