OPTIM® E-132

Identification & Functionality

Carrier

Low-Density Polyethylene (LDPE),

Resin-based

Plastics & Elastomers Functions

Adhesion Promoter,

Impact Modifier

Technologies

Plastics

Product Families

Plastics — Masterbatches

Additive Masterbatches

Plastics — Polymer Additives

Performance Additives,

Surface Modifiers

Features & Benefits

Materials Features

Good Mechanical Properties,

Non-Hygroscopic

Applications & Uses

Markets

Electrical & Electronics

Applications

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Compatible Polymers & Resins

Polyamide 6 (PA 6),

Polyamide 66 (PA 66),

Polyamides

Plastics & Elastomers End Uses

Cables

Applications

• Impact modifier for full range of unfilled polyamides for temperatures as low as -10 °C.
• Level of improvement obtained is a function of the OPTIM® E-132 addition level.
• Impact modifier for mineral & glass filled polyamides
• Adhesion promoter between metals, glass and engineering plastics with polyolefins.

Processing Conditions

• OPTIM® E-132 can be added to Polyamides to achieve good dispersion of fillers within the polymer matrix thereby obtaining best properties.
• Maximum processing temperature should not generally exceed 290°C.
• At temperatures above 290°C, these specialty polymers can evolve low concentrations of fumes.
• If overheated, more extensive decomposition may occur due to exposure of overheated polymers to atmospheric oxygen.
• Adequate local ventilation should be provided to remove the fumes from the work area.

Properties

Physical Form

Masterbatch,

Solid

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength at Break	11	MPa	ASTM D638/2010
Elongation at Break	700	%	ASTM D638/2010
Tensile Modulus	38	MPa	ASTM D638/2010

Typical Properties

	Value	Units	Test Method / Conditions
MFI (at 190°C/2.16 Kg)	1.3	g/10min	ASTM D1238
Density	0.89	g/cm³	ASTM D792
Bonded Maleic Anhydride	Medium	—	PLUSS® method
Yellowness Index	3	—	ASTM E-313

Thermal Properties

	Value	Units	Test Method / Conditions
Melting Temperature	114	°C	DSC

Packaging & Availability

Packaging Type

Bags,

Super Sacks

Packaging Information

• OPTIM® specialty polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC’s.
• They should be stored in cool and dry place.

Storage & Handling

Storage and Handling Procedures

• OPTIM® E-132 should be stored in a dry, cool and well-ventilated area.
• It is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-95°C for about 2 hours for obtaining best results.