Products

OPTIM® E-156 is a maleic anhydride modified high density polyethylene. It is used for a variety of applications where adhesion improvements or compatibilsation is required.

OPTIM® P-445 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

OPTIM® E-131 is a maleic anhydride modified very low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

NOVIS P-390 is a free radical modifier for polypropylene melt flow index. It is specifically used to improve the MFI of highly filled PP compounds.

OPTIPET™-213M is a chain extender that can react with the chains of recycled PET scrap and restore its original properties.

OPTIM® P-425 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

OPTIM® E-142 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6.

OPTIM® E-118 is a maleic anhydride modified linear low-density polyethylene. It has been designed to promote adhesion between carrier polymer and high loading of mineral fillers in HFFR cable compounds. Without this coupling agent, it is not possible to achieve the required mechanical properties in the cable compound.

OPTIM® E-126 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6.

OPTIM® P-425 IC is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

BindEX E-160 is a maleic anhydride modified linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is especially designed to combine aluminum sheets with polymer core in Aluminum composite panels, using extrusion coating process.

reCoupp® E-832 is a maleic anhydride modified speciality grade linear low density polyolefin, using advanced anhydride grafting technology. This grade is specifically designed to fulfill the need for rendering multilayer barrier films recyclable into film making again besides molding applications. Appropriate combination of base resin and functional groups in the material provides excellent tie-layer functionality between Nylon 6, Nylon 66, or EVOH, with variety of polyolefin grades used in barrier films for different packaging applications.

OPTIPET™ 214M is a chain extender master batch for polyamides. It reacts with recycled Nylon scrap and restores its original properties. OPTIPET™ 214M is used to give the combined effect of a reactive chain extender, as well as impact modifier for polyamide plastics. Multifunctional active material in the OPTIPET™ 214M master batch reacts with some of the polyamide endgroups of different chains. This crosslinks the smaller chains that had been formed due to degradation in the scrap during earlier use.

OPTIM® P-401 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

OPTIM® GE-344 is a glycidyl methacrylate modified ultra-low density polyethylene. It is used for toughening of Polycarbonates and Polyesters such as PET & PBT.

OPTIM® E-152 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

ADNYL® E-177 is a polymeric alloy of nylon and maleic anhydride grafted polyethylene. It is extensively used a an impact modifier/toughening agent for PA6.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

NOVIS P-492 is a high flow maleic anhydride grafted Polypropylene material. Presence of maleic anhydride moieties on PP chains make NOVIS P-492 significantly polar versus plain PP. This makes it useful as adhesion promotor when added to a polyolefin based hot melt composition. Being a low molecular weight polymer, it blends well with other ingredients in the composition. NOVIS P-492 is a polymer with narrow molecular weight distribution, which can impart higher mechanical strength compared with that provided by conventional waxes.

OPTIM® GE-340 is a glycidyl methacrylate modified polyethylene. It is used for compatibillizer and toughening of Polycarbonates and Polyesters such as PET & PBT.

BINDEX E-190 is a maleic anhydride modified metallocene based polyethylene. With advanced anhydride grafting technology, this grade is used to combine multilayer structures involving Nylon 6, Nylon 66, or EVOH for gas barrier properties with variety of HDPE, LLDPE and LDPE grades for functions like, moisture barrier, sealability etc.

BindEX E-186 is a maleic anhydride modified metallocene based linear low density polyethylene. With advanced anhydride grafting technology, this grade creates superb adhesion to EVOH, PA and PE, while maintaining excellent process ability.

ADNYL® E-170 is a polymeric alloy of nylon and maleic anhydride grafted polyethylene. It is extensively used as a high softening point toughening agent for PA6.

BindEX E-189 is a maleic anhydride modified metallocene based linear low density polyethylene. With advanced anhydride grafting technology, this grade is used to combine multilayer structures involving Nylon 6, Nylon 66, or EVOH for gas barrier properties with variety of HDPE, LLDPE and LDPE grades for functions like, moisture barrier, sealability etc.

MB-80 is an adhesive resin based on modified polyethylene. It can be used to produce a three-layer low temperature adhesive film, for manufacture of Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer with MB-80, which faces aluminum sheet during ACP manufacturing process. It can be processed on normal extruders used for making 3-layer polyethylene films.

OPTIM® P-408 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

ADNYL® E-179 is a maleic anhydride modified polyolefin elastomer. It is extensively used as an impact modifier/toughening agent for nylon 6, nylon 66 and other compounds.

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

BindEX E-183 is a maleic anhydride modified metallocene based linear low density polyethylene (mLLDPE) adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is blendable with PP random copolymer up to 30% proportion.

OPTIM® E-132 is a maleic anhydride modified low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

BindEX E-188 is a maleic anhydride modified metallocene based linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. Due to its high MFI it has easy processability in cast film applications.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.