Products

Polygem 739 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 739 gives a matte finish.

Polygem 2089 Fast Set Epoxy Coating is a fast-curing, epoxy resin specially formulated for use as a base-coat in quartz broadcast seamless flooring applications which will allow for a double broadcast or top-coating in a little as 2 hours. Polygem 2089 Fast Set Epoxy Coating is an easy to mix 2 to 1 by volume ratio and it’s low viscosity allows for easy to spread thin-coat applications. Polygem 2089 Fast Set Epoxy Coating is ideal for small areas or areas of critical service that demand a prompt return to service. Polygem 2089 Fast Set Epoxy Coating is resistant to most chemicals and solvents. Polygem 2089 Fast Set Epoxy Coating is non-blushing and the resin system of choice for cool/humid floors. Polygem 2089 Fast Set Epoxy Coating when mixed with clean dry silica sand, is also ideal for use as an epoxy mortar or grout for fast-track repairs and even cold weather applications.

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.

Polygem Aquaseal is a water-based epoxy vapor block / primer specially formulated for use as a surface primer for seamless flooring applications to provide superior adhesion of epoxy, urethane, and cementitious topcoats. Deeply penetrates concrete surfaces to provide a permanent and tenacious bond. Ideal for use on damp and porous concrete surfaces. Aqua-Seal is resistant to most chemicals and solvents. Excellent for new concrete.

Polygem 1618 Epoxy Floor Coating is a ultra-clear epoxy coating formulated to provide a durable high-gloss protective surface. Polygem 1618 Epoxy Floor Coating is ideal for concrete and wood floor surfaces and is ideal for a clear-coat over flake and quartz floors. Polygem 1618 Epoxy Floor Coating is also excellent as a sealer coat over artificial rock and coral structure used in underwater exhibits and aquariums.

Polygem Aqua Gem Water Based Epoxy Primer is a water-based epoxy coating specially formulated for use as a hard coat for polystyrene and urethane foam surfaces. Aqua-Gem can be mixed with sand to create a thicker and very solid impact-resistant surface. Aqua-Gem’s unique water base formulation allows for ease of application over other hard coatings. When thickened with the Polygem Thickening Agent the Aqua-Gem will not stick to a trowel like other epoxy formulations. Aqua-Gem is ideal for use on damp and porous surfaces and can be used as a primer on hard to bond to surfaces. Add extra water to Aqua-Gem to use as a deep penetrating sealer for porous surfaces.

Polygem 738 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 738 gives a glossy finish.

Polygem 732 UV Resistant Top Coat is a standard toopcoat paint that is used to resist UV rays. This product is available in 1.5 and 3 gallon packaging.