Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Filler Content
- 28 - 32
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
- Processing Parameters
- Additional Information
Value | Units | Test Method / Conditions | |
Tensile Strength | max. 26 | MPa | ISO 527-2 |
Flexural Strength | max. 45 | MPa | ISO 178 |
Elongation at Yield | 5 | % | ASTM D 638 |
Elongation at Break | 16 | % | ASTM D 638 |
Flexural Modulus (23°C) | 2500 | MPa | ISO 178 |
Charpy Unnotched Impact Strength (23°C) | NB | kJ/m² | ISO 179 |
Charpy Notched Impact Strength (-20°C) | 3 | kJ/m² | ISO 179 |
Charpy Notched Impact Strength (23°C) | 11 | kJ/m² | ISO 179 |
Charpy Unnotched Impact Strength (-20°C) | 24 | kJ/m² | ISO 179 |
Value | Units | Test Method / Conditions | |
Melt Flow Index - MFI (230°C/2.16kg) | 12 | g/10min | ISO 1133 |
Density | 1.1 | g/cm³ | ISO 1183 |
Molding Shrinkage - Flow | 0.8 - 1.0 | % | ISO 294-4 |
Molding Shrinkage - Across Flow | 0.8 - 1.0 | % | ISO 294-4 |
Value | Units | Test Method / Conditions | |
Vicat Softening Tempurature A (50°C/h at 9,81N) | 145 | °C | ISO 306 |
Vicat Softening Tempurature B (50°C/h at 49,05N) | 75 | °C | ISO 306 |
Heat Distortion Temperature B (120°C/h at 455kPa) | 116 | °C | ISO 75/1 |
Heat Distortion Temperature A (120°C/h at 1820kPa) | 64 | °C | ISO 75/1 |
Coefficient of Linear Thermal Expansion | 55 - 75 | 10E-6/°C | Polykemi |
Value | Units | Test Method / Conditions | |
Glow Wire Flammability Index - GWFI (2 mm) | 750 | °C | IEC 60695-2-12 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 70 - 80 | °C | — |
Drying Time | 2 - 4 | h | — |
Back Pressure | 60 - 100 | bar | — |
Melt Temperature | 205 - 260 | °C | — |
Mold Temperature | 40 - 80 | °C | — |
Peripherical Screw Speed | 600 - 750 | mm/s | — |
Value | Units | Test Method / Conditions | |
Scratch resistance - 10 N Fine structure | 6.9 | dL | ISO 1518/D65 |
Packaging & Availability
- Country Availability
- Regional Availability