Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Filler Content
- 18 - 22
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Flammability
- Processing Parameters
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.1 | % | — |
Density | 1.19 | g/cm³ | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Strength | max. 95 | MPa | ISO 527-2 |
Flexural Strength | max. 140 | MPa | ISO 178 |
Flexural Modulus (23°C) | 7000 | MPa | ISO 178 |
Elongation at Break | 6.5 | % | ISO 527-2 |
Charpy Notched Impact Strength (-20°C) | 4 | kJ/m² | ISO 179 |
Charpy Notched Impact Strength (23°C) | 4 | kJ/m² | ISO 179 |
Value | Units | Test Method / Conditions | |
Heat Distortion Temperature B (120°C/h at 455kPa) | 104 | °C | ISO 75/1 |
Heat Distortion Temperature A (120°C/h at 1820kPa) | 100 | °C | ISO 75/1 |
Vicat Softening Tempurature A (50°C/h at 9,81N) | 112 | °C | ISO 306 |
Vicat Softening Tempurature B (50°C/h at 49,05N) | 107 | °C | ISO 306 |
Value | Units | Test Method / Conditions | |
Glow Wire Flammability Index - GWFI (2 mm) | 650 | °C | IEC 60695-2-12 |
UL-94 Flammability (1.6 mm) | HB | - | UL94 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 80 | °C | — |
Drying Time | 2 - 4 | h | — |
Melt Temperature | 190 - 230 | °C | — |
Mold Temperature | 60 - 80 | °C | — |
Back Pressure | 60 - 100 | bar | — |
Peripherical Screw Speed | 250 - 400 | mm/s | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability