Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 3700.0 MPa ISO 178 Flexural Strength 110.0 MPa ISO 178 Tensile Modulus 3700.0 MPa ISO 527 Tensile Strength at Break 70.0 MPa ISO 527 Tensile Elongation at Break 3.0 % ISO 527 Impact Strength (Charpy, at 23°C) 19.0 kJ/m² ISO 179/1eU Notched Impact Strength (Charpy, at 23°C) 1.5 kJ/m² ISO 179/1eA Ball Indentation Hardness (H358/30) 163.0 MPa ISO 2039-1 - Physical Properties
Value Units Test Method / Conditions Density 1070.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Vicat B50 103.0 °C ISO 306 HDT / A (1.8 MPa) 89.0 °C ISO 75-1/-2 - Flammability
Value Units Test Method / Conditions Flammability (1.5 mm) HB class UL 94 Flammability (3.0 mm) HB class UL 94 Glow Wire (GWFI, 650°C, 1mm) Passed - DIN EN 60695 Glow Wire (GWFI, 650°C, 2mm) Passed - DIN EN 60695 Glow Wire (GWFI, 650°C, 3mm) Passed - DIN EN 60695 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Melt Temperature 210 - 260 °C - Mould Temperature 40 - 80 °C - - Rheological Properties
Value Units Test Method / Conditions Melt Index (MVR) 25.0 cm³/10min ISO 1133 MVR Temperature 220.0 °C - MVR Load 10.0 kg - Shrinkage (24h) min. 0.55 % ISO 294-4
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.