Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^12 | Ohm | IEC 93 |
dielectric loss factor | 0,05 | tan s | IEC 250 |
Shrinkage | 0,13 | % | ISO 2577 |
Water absorption | 0,30 | % | ISO 62 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
impact strength | 50 | KJ/m2 | ISO 179 |
fibre length | 25/50 | mm | DF PA3.01 |
tracking resistance | CTI 600 | level | IEC 112 |
Flexural strength | 120 | N/mm2 | ISO 14125 |
dielectric strength | 20 | KV/mm | IEC 243-1 |
surface weight | 6 | g/m2 | ISO 10352 |
fibre Content | 20 | % | ISO 1172 |
Curing Time | 60 | sec | ISO 12114/1 |
Flexural modulus | 9 | N/mm2 | ISO 14125 |
incandescence bar test | 2-10 | mm | IEC 707 |
glow wire test at 3,0 mm | 960 | °C | IEC 60695-2 |
volume resistance | 1013 | Ohm x cm | IEC 93 |
Specific Density | 1,80 | g/cm3 | ISO 1183 A |
dielectric constant | 4,5 | — | IEC 250 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure > 80 bar
- Molding temperature 130 - 150 °C