Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 60112 |
fibre mass Content | 30 | % | ISO 1172 |
fibre length | 25/50 | mm | PA 3.01 |
Specific Density | 180 | g/cm3 | ISO 1183 A |
surface weight | 3 | g/m2 | ISO 10352 |
Flexural modulus | 10 | N/mm2 | ISO 14125 |
Flexural strength | 170 | N/mm2 | ISO 14125 |
Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
Shrinkage | 11 | % | ISO 2577 |
impact strength | 70 | KJ/m2 | ISO 179 |
dielectric strength | 24 | KV/mm | IEC 60243-1 |
dielectric loss factor at 1000 Hz | 2 | tan s | IEC 60250 |
Water absorption | 50 | mg | ISO 62 |
dielectric constant at 1000 Hz | 4,5 | — | IEC 60250 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 135 - 155 °C