Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
dielectric loss factor at 1000 Hz | 0,02 | tan s | IEC 250 |
Shrinkage | 0,08 | % | ISO 2577 |
surface weight | 4.5 | g/m2 | ISO 10352 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
Curing Time | 65 | sec | ISO 12114/1 |
tracking resistance | CTI 600 | level | IEC 112 |
Specific volume resistance | 1014 | Ohm x cm | IEC 93 |
Water absorption | max. 50 | mg | ISO 62 |
Flexural modulus | 10 | N/mm2 | ISO 14125 |
Flexural strength | 170 | N/mm2 | ISO 14125 |
dielectric strength | 20 | KV/mm | IEC 243-1 |
Specific Density | 1,77 | g/cm3 | ISO 1183 A |
impact strength | 70 | KJ/m2 | ISO 179 |
fibre Content | 30 | % | ISO 1172 |
fibre length | 25 | mm | PA3.01 |
incandescence bar test | 2-15 | mm | ISO 707 |
class of inflammability | FH 2 | level | ISO 707 |
glow wire test at 960°C | 3,0 | mm | IEC 695 part 2-1 |
dielectric constant at 1000 Hz | 4,5 | — | IEC 250 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 150 °C