Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
dielectric loss factor at 1000 Hz | 0,02 | tan s | IEC 250 |
Shrinkage | 0,10 | % | ISO 2577 |
fibre length | 25 | mm | PA 3.01 |
Density | 1,60 | g/cm3 | ISO 1183 A |
tracking resistance | CTI 600 | level | IEC 112 |
Specific volume resistance | 1014 | Ohm x cm | IEC 93 |
Flexural strength | 120 | N/mm2 | ISO 14125 |
dielectric strength | 20 | KV/mm | IEC 243-1 |
impact strength | 40 | KJ/m2 | ISO 179 |
fibre Content | 25 | % | ISO 11667 |
reactivity at 145°C | 50 | sec | ISO 12114/1 |
Flexural modulus | 7 | N/mm2 | ISO 14125 |
heat distortion temperature | min. 160 | °C | ISO 75-2a |
Flammability (HB) | 3,0 | mm | UL-94 |
dielectric constant at 1000 Hz | 4,5 | — | IEC 250 |
Water absorption | max. 0,50 | % | ISO 62 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 20 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 155°C