Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^14 | Ohm | IEC 93 |
fibre length | 25 | mm | PA 3.01 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
surface weight | 4 | g/m2 | ISO 10352 |
impact strength | 50 | KJ/m2 | ISO 179 |
tracking resistance | CTI 600 | level | IEC 112 |
Water absorption | max. 50 | mg | ISO 62 |
Flexural strength | 145 | N/mm2 | ISO 14125 |
fibre Content | 33 | % | ISO 1172 |
Specific Density | 148 | g/cm3 | ISO 1183 A |
Shrinkage | 4 | % | ISO 2577 |
Flexural modulus | 8.2 | N/mm2 | ISO 14125 |
Tensile strength | 65 | N/mm2 | ISO 527-4 |
fire resistance | S4, SR2, ST2 | level | DIN 5510 |
Toxicity (tzul=30min) | max. 1 | — | — |
Toxicity (tzul=15min) | max. 1 | — | — |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 30 sec
- /mm
- Molding pressure 60 - 70 bar
- Molding temperature 135 - 150 °C