Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^14 | Ohm | IEC 60093 |
Shrinkage | 0,00 | % | ISO 2577 |
fibre length | 25 | mm | PA 3.01 |
impact strength | 65 | KJ/m2 | ISO 179 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 60112 |
surface weight | 4 | g/m2 | ISO 10352 |
Flexural strength | 160 | N/mm2 | ISO 14125 |
Curing Time | 65 | sec | ISO 12114/1 |
Water absorption | max. 50 | mg | ISO 62 |
fibre Content | 25 | % | ISO 1172 |
Specific Density | 1,80 | g/cm3 | ISO 1183 A |
Tensile strength | 65 | N/mm2 | ISO 527-4 |
Flexural modulus | 9.2 | N/mm2 | ISO 14125 |
Tensile Modulus | 9.5 | N/mm2 | ISO 527-4 |
dielectric strength | min. 15 | kV/mm | IEC 60243-1 |
long-term heat resistance at 20.000h | 145 | °C | IEC 60216 |
oxygen index | 22 | % | ISO 4589 |
Specific volume resistance | 1013 | Ohm x cm | IEC 60093 |
Storage & Handling
- Handling and Storage
- Storage condition : Store dry at max. 25 °C and out of direct sun light
- Molding time : > 25 sec./mm
- Molding pressure : > 20 bar
- Molding temperature : 130 - 150°C