Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
surface weight | 4.5 | g/m2 | ISO 10352 |
fibre length | 25 | mm | PA 3.01 |
impact strength | 65 | KJ/m2 | ISO 179 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
fibre Content | 28 | % | ISO 1172 |
Water absorption | max. 50 | mg | ISO 62 |
Flexural modulus | 9 | N/mm2 | ISO 14125 |
Flexural strength | 140 | N/mm2 | ISO 14125 |
Tensile strength | 70 | N/mm2 | ISO 527-4 |
Tensile Modulus | 9 | N/mm2 | ISO 527-4 |
Curing Time | 75 | sec | ISO 12114/1 |
Specific Density | 192 | g/cm3 | ISO 1183 A |
Shrinkage | -5 | % | ISO 2577 |
burning behaviour | max. 20 | mm/min | UTAC 18502 / 92/28 EG |
Storage & Handling
- Handling and Storage
- Storage condition : Store dry at max. 25 °C and out of direct sun light
- Molding time : > 25 sec./mm
- Molding pressure : > 20-120 bar
- Molding temperature : 130 - 150°C