Products

Polynt Group SMC LP 6700 LW is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LP 6700 LW is a low weight compounds and it has been developed for structural parts. SMC LP 6700 LW meets mechanical and thermal properties with reduction weight of the final parts. SMC LP 6700lw is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

EPOVIA OPTIMUM® KRF 4031 TA - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats,pools,surficial protection (liner,top coat) through hand lay up and spray up method.

Higloss TR® 99R Base White gel coats are high performance products formulated for the reinforced plastics composites industry.

Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Norsodyne® UPE-1679ENC - thixotropic, preaccelerated, with LSE system, good chemical, heat and water resistance. It is generally used in marine applicatons.

Polynt Group HUP-LW 16/35 RN-9500 is generally used in automotive, mass transports applications.

STYPOL® 040-4917 is a clear,acrylic modified NPG® isophthalic gel coat. STYPOL® 040-4917 has been designed for use in the manufacture of cultured marble,onyx,and granite.

Polynt Group 781-6010 - toughened vinyl ester resinthat offers improved fracture toughness and crack resistance; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Norsodyne® BR-290EXT - multicolor application, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

BMCarbon® 30CF60-12mm is generally used in aeronautical, automotive, industrial sector, leisure and clothing applications.

DISTITRON® 152 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Enydyne® LSP-8060B - ortho-DCPD, preaccelerated resin for long gel time RTM. Main applications areas are automotive, industrial sector, marine etc.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Norsodyne® G-550Y is general purpose orthophthalic resin for hand lay up and spray up with high strength and it is generally used in automotive, industrial sector, marine applicatons.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group HUP 12/50 RB-9500 is generally used in automotive, mass transports applications.

Polycor® Tooling VE SP gel coats are specifically formulated with selected vinyl ester resins that exhibit high heat distortion temperature to withstand the repeated molding of FRP laminates. They provide a high gloss and hard durable surface. These tooling gel coats are ready to be sprayed after the addition of the proper amount of the appropriate of promoters, then the right amount of methyl ethyl ketone peroxide. Read application instructions carefully, because even though manufacturing precautions are used to make tooling gel coat, a misapplication of these products can produce unacceptable results.

Norsodyne® M-0070C - for low profile systems, class a. It is generally used in automotive applicatons.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

NORSODYNE® M 28070 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

ARMORSTAR VSXH Series is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

Epovia Optimum® BC 4200 PA - vinylester barrier coat for spray application. Main applications areas are building and construction, composites, industrial sector, marine etc.

SMCarbon® 24CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

POLYCOR® LSC NPG FLEX BR WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Polynt Group HUP 12/30 LE RB-9500 is generally used in automotive, foundries, mass transports, peroxides, railway sector applications.

Polynt Group 222X is clear and transparent for granite applications. It is generally used in composites applicatons.

Norsodyne® H-305HV has general purpose, good chemical resistance. It is generally used in coatings applicatons.

Rezimac® 12-1204 is an epoxy ester exhibiting excellent hardness and adhesion, as well as alkali and abrasion resistance. This resin finds use in concrete coatings and maintenance primers. It can also be used in trade sales applications because of its mineral spirits solubility. Manufactured in North America. All components of this product are listed on the DSL.