Products

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

Duramac® 204-1036 is a positive-drying tofa alkyd that has excellent gloss and color retention. It can be combined with amino resins or used directly in air-dry systems to give excellent exterior durability. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Lumicure® 15-1516 is UVEB curable designed for high end applications with good hardness, flexibility and chemical resistance.

Macopol® 214-1008 is a vinyl toluene-modified alkyd copolymer featuring excellent gloss and hardness. This resin formulates easily into paints with very fast air-dry rates, scratch and mar resistance, and it reduces odors. Macopol® 214-1008 can also be used in stain-blocking primers. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 740 is a styrene acrylic latex polymer with good block resistance and corrosion resistance when formulated for use in industrial metal primers. This resin has high gloss capability and utility for use in direct-to-metal finishes. It retains performance properties at higher pigment volume concentrations. Manufactured in North America.

Duramac® 204-1434 is a medium oil alkyd resin that develops sharp gloss, has excellent brushing properties, and has excellent compatibility with aliphatic solvents for aerosol applications. In addition, this resin has sufficient hydroxyl functionality for baking applications where additional adhesion properties are desired. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 550 is a styrene acrylic latex that has demonstrated superior water, blush and efflorescence resistance as well as adhesion to masonry surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 737 is a styrene acrylic latex designed for industrial maintenance coatings at 50 g/l VOC or lower, while maintaining excellent overall properties. Manufactured in North America.

Polymac® 2360 is a very high reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins E.E.W. = 700-950 in 50:50 ratio, this resin offers good flow, good chemical resistance and mechanical properties for interior decorative or primer coatings.

Duramac® 201-1170, a long oil alkyd resin, is a HAPs-free version of Duramac® 50-5070. It has proven performance in a variety of trade sales coatings. Manufactured in North America. All components of this product are listed on the DSL.

Carbamac® HS 57-5849 is designed to be a modifier for conventional systems to meet 350 g/L VOC limits.

Archemis® QD 201-2195 is a specially modified high solids alkyd supplied at 96% solids in mineral spirits. Coatings formulated at 250 g/l VOC provide excellent set- to-touch, tack-free, dry hard and through-dry characteristics. Gloss and yellowing properties are similar to 450 g/l VOC coatings based on 70% solids conventional long oil alkyds. Formulations at 150 g/l VOC are also possible. Manufactured in North America.

Duramac® 56-5619 is a higher solids vehicle that provides good dry and enamel holdout characteristics.

Duramac® 201-1180 is a tofa-based long oil alkyd for use in interior and exterior architectural finishes. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 51-5113 is a high drink soya-based alkyd that possesses excellent drying and working properties. Excellent for color and gloss retention. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 56-5633 is good dry, enamel holdout, and soil removal coating mainly applied in industrial coating applications.

Polymac® 2090 is a medium to low reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins EEW = 700-850 in 60:40 ratio, this resin offers excellent flow, good corrosion resistance, good overall chemical resistance, and very good mechanical properties for interior decorative or primer coatings.

Duramac® 204-1452 is a medium oil alkyd resin. Manufactured in North America. All components of this product are listed on the DSL.

Chemacoil® 240-2101 is a unique 100% solids synthetic oil that is recommended for use as a stain vehicle or a modifier for latex paints. It has good dry, flexibility, adhesion and color retention, while not supporting mildew growth. When formulated into a semitransparent stain, Chemacoil® 101 shows good resistance to crocking, or color transfer, when wet. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5160 is a high gloss, general purpose carboxyl-functional polyester resin designed for cure with TGIC at a 93:7 ratio and with primid xl-552 at a 95:5 ratio. The resulting coatings exhibit excellent flow, good flexibility and superior exterior durability. Polymac® 5160 is TMA-free.

Rezimac® WR 73-7358 is an air-dry modified polyolefin for penetrating stains on vertical wood surfaces. It can be easily formulated into coatings that exhibit excellent application characteristics, drying properties, early water resistance and package stability. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1409 is a medium oil alkyd resin. It is fast drying and can develop sharp gloss with excellent brushing properties. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.

Polymac® 5040 is a low reactivity, high tg carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio 94:6 ratio is also possible . The resulting coatings exhibit excellent flow, exterior durability and mechanical properties, and enhanced impact fusion resistance. Polymac® 5040 is TMA-free.

Aquamac® 541 is a styrene acrylic latex polymer that provides outstanding tannin stain block over redwood or cedar. It also exhibits very good stain block over a variety of water-based and solvent-based inks. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 204-2768 is a very durable high solids medium oil alkyd resin. This resin reduces rapidly for improved application properties in high solids enamels. Manufactured in North America.

Polymac® 2510 is a very versatile, high reactivity, carboxyl-functional polyester resin for powder coatings. It can be cured with epoxy resins with eew's from 500-1000 to yield hybrid formulations with polyester/epoxy ratios from 45:55 to 60:40. These interior decorative or primer coatings cure rapidly and have excellent mechanical and corrosion resistance properties.

Duramac® 54-5465 is a medium oil alkyd intended for use in traffic and marking paints. This resin offers a fast dry time as well as good pigment wetting characteristics. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 211-1033 is a 100% solids linseed alkyd with outstanding brushing and leveling properties. This resin is compatible with bodied/raw and long oil alkyds. It can easily be formulated into exterior stains, varnishes and other trade sales applications to improve performance. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 705 is a high gloss styrene acrylic latex featuring outstanding color and gloss retention as well as an excellent combination of hardness and flexibility. This resin exhibits outstanding early water resistance, salt spray and quv/prohesion corrosion resistance. It provides good airless spray properties that produce high performance metal protective finishes. Coatings formulated with this Aquamac® 705 also exhibit outstanding adhesion to smooth, polished or difficult-to-grip metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 51-5150 is a medium oil alkyd that meets the specification requirements of tt-r-266d type iii. It is designed to be used in brushable a.I.M. Enamels. Manufactured in North America. All components of this product are listed on the DSL.