Products

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

NORSODYNE® H 36338 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks,pools through hand lay up and spray up method.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

DISTITRON® 429 BSX25Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Polymac® HS 57-5789 is a high solids polyester resin that is HAPs-free. Coatings based on this resin exhibit outstanding overall performance coupled with excellent gloss retention under accelerated weathering conditions. Enamels formulated with polymac® HS 57-5789 are suitable for interior and exterior applications. Manufactured in North America. All components of this product are listed on the DSL.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Stypol® 040-8086 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.