Products

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LS 3681 CL1 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for railway applications. Good mechanical properties and good fire protection grade are combined into the SMC LS 3681 CL1. SMC LS 3681 CL1 complies with uni cei 11170-3 CL1a and electrical applications uni cei 11170-3 lr4. SMC LS 3681 CL1 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group SMC LP 2500 R33 is a sheet molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This SMC has been developed for structural parts. SMC LP 2500 R33 joint good mechanical properties and good varnish adhesion. SMC LP 2500 R33 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LPA 2000 R27 is a sheet molding compound based on an unsaturated polyester resin class “A” grade reinforced with glass fibers. This SMC has been developed for body panel application, with good mechanical properties and excellent surface. Good varnish adhesion and excellent gluing are other peculiarities of SMC LPA 2000 R27. SMC LPA 2000 R27 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

OPTIPLUS 40-8091 - Single component tooling resin that allows for rapid mold building by infusion. Resulting tools have excellent heat resistsance,dimensional stability and exceptional mechnical properties while also being light weight. Product is MACT compliant with a longer gel time than 040-8089.

POLYCOR® TOP COAT BR WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

OPTIPLUS 40-8089 - Single component tooling resin that allows for rapid mold building by open mold lamination. Resulting tools have excellent heat resistsance,dimensional stability and exceptional mechnical properties while also being light weight. Product is MACT compliant.

DISTITRON® 186 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Polynt Group SMC LP 6700 LW is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LP 6700 LW is a low weight compounds and it has been developed for structural parts. SMC LP 6700 LW meets mechanical and thermal properties with reduction weight of the final parts. SMC LP 6700lw is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

BMCarbon® 70CF45-6mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 26CF30-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

UDCarbon® 90CF60-12K is a unidirectional molding compound based on epoxy resin and reinforced with continuous carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group SMC VE 3700 is a sheet molding compound based on a vinylester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC VE 3700 joint good mechanical properties, excellent heat resistance and high chemical resistance. SMC VE 3700 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LS 3200 R20 C20 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R20 C20 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R20 C20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Stypol® APMV4000 - polymethylmethacrylate low profile additive. For use in SMC, BMC and wet molding applications. Excellent mechanical properties and heat resistance. Main applications areas are electronic and electrical, home and domestic applications, industrial sector etc.

Polynt Group SMC 3300 RF 25 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC 3300 RF 25 joint good mechanical properties and good fire protection grade. SMC 3300 RF 25 is certified V0 3,0 mm by UL laboratories. SMC 3300 RF 25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LPA 2000 R35 is a sheet molding compound based on an unsaturated polyester resin class “A” grade reinforced with glass fibers. This SMC has been developed for body panel application, with excellent mechanical properties and excellent surface. Good varnish adhesion and excellent gluing are other peculiarities of SMC LPA 2000 R35. SMC LPA 2000 R35 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 80CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

POLYCOR® ISO NPG PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

DISTITRON® 279 - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group SMC 3300 RF R33 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC 3300 RF R33 joint excellent mechanical properties and good fire protection grade. SMC 3300 RF R33 is certified V0 3,0 mm by UL laboratories. SMC 3300 RF R33 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC 4500 R23 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for sink and tray application. SMC 4500 R23 joints good mechanical properties with stain and chemical resistance. SMC 4500 R23 has been studied to show a decorative effect on the part molded. SMC 4500 R23 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

BMCarbon® 70CF45-12mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

Polynt Group SMC 3500 Duralynt is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This material has been developed to show a high weathering resistance. SMC 3500 Duralynt joints good mechanical properties and good flow SMC 3500 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

BMCarbon® 30CF60-6mm - Bulk molding compound based on Vinylester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.