Ply-Guard EP (WB) - Polyset - Blush Resistant - Roller

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Epoxy & Epoxy Derivatives
Product Type: 2K (2 component) Coating,
Epoxy Coating,
Waterborne Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings
Chemical Composition: Modified Bisphenol A epoxy resin crosslinked with a water soluble amine adduct.

Features & Benefits

Ready-to-Use Product Features: Blush Resistant,
Low Odor
Product Highlights: Ply-Guard EP (WB) is used as a general purpose coating for concrete floors and as a primer under epoxy, polyurethane, and acrylic materials. The raw material package has a 30-year history of success as a concrete coating. Ply-Guard EP (WB) is recommended for coating warehouse and factory floors, automotive repair facilities, residential garage floors, and many other commercial and industrial maintenance applications. Due to its ease of application, Ply-Guard EP (WB) is an excellent choice for do-it-yourself floor coating projects.
Colors & Limitations: Sixteen (16) Standard Colors, Plus Clear

Exterior Pigmented Applications Will Show Chalking

Exterior Clear Applications Are Not Recommended

Acid-Etched Surfaces Must Be Thoroughly Rinsed Before Coating

Not Recommended For Use Over Acid Stain

Applications & Uses

Technical Details & Test Data

Technical Details: Mix Ratio, by Volume: 4:1

Solids Content, by Weight, %: 51

Solids Content, by Volume, %: 43.5

Volatile Organic Compounds (VOC), gr./lt.: 50

Pot Life , 77°F , Hours: 2-3

Cure Times, 77°F:

Dry To Touch, Hours: 2

Recoat, Hours: 12-18

Light Traffic, Hours: 18-24

Full Cure, Days: 7

Higher temperatures and lower humidity will accelerate cure times. Lower
temperatures and high humidity will lengthen cure time.

Properties Performance

Gloss , 60°: 85-90

Pencil Hardness, ASTM D3363: F-H

Adhesion to Damp Concrete, ASTM D451:
Concrete Fails Before

Tabor Abrasion, 1000 gm. Load 1000 Cycles, CS-17 Wheel: 60-65 mg loss
Chemical & Stain Resistance: Coffee No Effect

Vegetable Oil No Effect

Mustard No Effect

Whiskey No Effect

Urine No Effect

Trisodium Phosphate, 25% Solution No Effect

Gasoline No Effect

Motor Oil No Effect

Brake Fluid
Slight Softening, Film Recovers

Transmission Fluid No Effect

Mineral Spirits No Effect

10% Sulphuric Acid No Effect

10% Hydrochloric Acid No Effect

10% Acetic Acid No Effect

Xylene
Slight Softening, Film Recovers

MEK No Effect

Mix Ratio, by Volume:	4:1
Solids Content, by Weight, %:	51
Solids Content, by Volume, %:	43.5
Volatile Organic Compounds (VOC), gr./lt.:	50
Pot Life , 77°F , Hours:	2-3
Cure Times, 77°F:
Dry To Touch, Hours:	2
Recoat, Hours:	12-18
Light Traffic, Hours:	18-24
Full Cure, Days:	7
Higher temperatures and lower humidity will accelerate cure times. Lower temperatures and high humidity will lengthen cure time.
Properties Performance
Gloss , 60°:	85-90
Pencil Hardness, ASTM D3363:	F-H
Adhesion to Damp Concrete, ASTM D451:	Concrete Fails Before
Tabor Abrasion, 1000 gm. Load 1000 Cycles, CS-17 Wheel:	60-65 mg loss

Coffee	No Effect
Vegetable Oil	No Effect
Mustard	No Effect
Whiskey	No Effect
Urine	No Effect
Trisodium Phosphate, 25% Solution	No Effect
Gasoline	No Effect
Motor Oil	No Effect
Brake Fluid	Slight Softening, Film Recovers
Transmission Fluid	No Effect
Mineral Spirits	No Effect
10% Sulphuric Acid	No Effect
10% Hydrochloric Acid	No Effect
10% Acetic Acid	No Effect
Xylene	Slight Softening, Film Recovers
MEK	No Effect