Products

RM40 molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

RM40Z molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

RM40Z molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

CM-P01 is used in extruded sheet, blown film, and injection molded polypropylene.

CN-E01 is a specialized nucleating agent masterbatch intended for use in gas injection and chemical foaming applications to control the uniformity of gas cells, critical to making high quality foam with desired properties.

CM-S01 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

RZ40 release aid masterbatch contains zinc stearate and is used in injection molding high impact polystyrene, ABS, nylon, and PBT. Polyvel RZ40 functions at low levels to reduce adhesion between mold surface and polymer. Polyvel offers zinc stearate masterbatches for other polymer applications including: polypropylene; polyethylene and others.

CP-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

RO20 consists a wide variety of additives that modify the surface of the resin to reduce the coefficient of friction. The additives used include Silicone, Zinc stearate, Ethylene bis stearamide (EBS), Erucamide, Oleamide, Molybdenum disulfide (MoS2), PTFE.

CM-N02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

NH-P01 masterbatch creates superior softness by reducing surface coefficient of friction with out the need for additional processing steps. This, combined with very low use levels, makes NH-P01 and extremely cost-effective means of adding soft feel to a wide variety of PP nonwoven products.

CN-L03, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

HD-L03, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

HP-N01 pelletized masterbatch is a convenient, cost-effective product for handling n-butyl benzene sulfonamide plasticizer for nylon polyamide which otherwise is a liquid. N-butyl benzene sulfonamide improves nylon processability by lowering its viscosity.

VF-P01 is pelletized, dry, and free flowing polypropylene antifog masterbatches formulated for hot and cold food contact applications while maintaining excellent clarity and thermal stability at low us levels.

VS-E09 is the choice for cast and blown mono and multilayer LDPE.

VF-P05 is pelletized, dry, and free flowing polypropylene antifog masterbatches formulated for hot and cold food contact applications while maintaining excellent clarity and thermal stability at low us levels.

CAP10 is a highly dispersed clarifying agent for polypropylene homo and copolymers. CAP10 increases the number of polypropylene crystals growing from the molten resin. This results in spherulite sizes below the wavelength of light thereby reducing light refraction.

CT-L03, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

CN-P01 increases throughput by decreasing the amount of time required for crystallization. This is accomplished by starting the crystallization process at a higher temperature.

HD-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

CT-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

VF-151 works faster and at lower levels than previous generations of antifogs, giving a better film surface with less added cost. VF-151 is a dry, dust-less, pelletized masterbatch that is easily incorporated into film or sheet by separately feeding or by dry (salt and pepper) blending upstream. The carrier is based on polyethylene and will mix well with low density, linear low density, and most ethylene copolymers. As always, working with Polyvel means that we are willing and able to customize the loading of additive or the carrier system to best suit your needs. This product is designed for use in extruded film and sheet or blown film.

CM-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

CM-E02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

VF-P08 is pelletized, dry, and free flowing polypropylene antifog masterbatches formulated for hot and cold food contact applications while maintaining excellent clarity and thermal stability at low us levels.

RE20 consists a wide variety of additives that modify the surface of the resin to reduce the coefficient of friction. The additives used include Silicone, Zinc stearate, Ethylene bis stearamide (EBS), Erucamide, Oleamide, Molybdenum disulfide (MoS2), PTFE.

CM-P03 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

VB-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

CN-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.