Products

Poolkemie SILIMOLD AD 130 is a Complex mold used in Prototypes and resin, plaster, cement, pottery objects. Pad printing. Addition base reticulation.

Poolkemie ELASTOPUR E 90 is a Mold Subjected to High Mechanical Strength, it's used in Production case mold for ceramic and sanitary fixtures.

Poolkemie SILIMOLD AL 40 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process. SILIMOLD AL-40 silicon rubber is characterized by its medium-high hardness, an high dimensional stability and a good mechanical resistance. Thanks to these properties, it may also be utilized in the manufacture of molds for the reproduction of large sized patterns.

Poolkemie POLIMOLD HR 25 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie POLIMOLD TR 55 is a two component room temperature vulcanising poly-urethane rubber which cures with addition of the appropriate hardener. Once cured, this rubber becomes flexible and resistant, free from air bubbles and imperfections. It is suitable in the manufacture of molds for production of articles made of plaster and cement thanks to its accurate reproduction of fine details and due to its extremely low linear shrinkage.

Poolkemie POLIMOLD HF 35 is a Complex mold used in Serial reproduction of cement, plaster medium/large sized products.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD GE 02 gel is characterized by low hardness and no linear shrinkage, high resistance and dielectric properties.

Poolkemie SILIMOLD AD 20 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD 20 silicon rubber is characterized by its medium low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of complex molds with many undercuts.

Poolkemie SILIMOLD AL 25 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process.SILIMOLD AL-25 silicon rubber is characterized by its medium-low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

Poolkemie SILIMOLD ADT 40 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD T-40 silicon rubber is characterized by its medium high hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

Poolkemie POLIMOLD NT 40 is used in Polyurethane rubber for mold making and it's Complex mold have applcations in Serial reproduction of rubber Technical Articles, cement, plaster medium - large sized products.

Poolkemie ELASTOPUR E 70 is a Mold Subjected to High Mechanical Strength, it's used in Production case mold for ceramic and sanitary fixtures.

Poolkemie SILIMOLD AD 150 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD-150 silicon rubber is characterized by its high hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

Poolkemie SILIMOLD AD 30 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD 30 silicon rubber is characterized by its low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of complex molds with many undercuts.

Poolkemie POLIMOLD NT 25 is used in Polyurethane rubber for mold making.and it's Complex mold have applications in Serial reproduction of rubber Technical Articles, cement, plaster medium sized products.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

Poolkemie SILIMOLD AL 20 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process. SILIMOLD AL-20 silicon rubber is characterized by its medium-low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

It is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD ADT 05 silicon rubber is characterized by its low hardness and no linear shrinkage.

Poolkemie SILIMOLD AD 12 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD 12 silicon rubber is characterized by its low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of complex molds with many undercuts.

Poolkemie SILIMOLD BLD D37 is Suitable for making mold for footwear, good dimensional stability also in the reproduction of medium-large-sized products.

Poolkemie POLIMOLD HR 40 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie SILIMOLD AD 10 is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST AD, according to the polyaddition process. SILIMOLD AD 10 silicon rubber is characterized by its low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of complex molds with many undercuts.

Poolkemie POLIMOLD HRP 40 is a Complex mold used in Serial reproduction of cement, plaster large sized products.

Poolkemie SILIMOLD AL 10 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process.SILIMOLD AL-10 silicon rubber is characterized by its low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

Poolkemie POLIMOLD HF 25 is a Complex mold used in Serial reproduction of cement, plaster medium sized products. High fluidity, elasticity and mechanical strength, low specific gravity, very small linear shrinkage. Suitable for realization of molds to produce cement and plaster products, decorative garden articles, rosettes, cornices, religious and decorative goods.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

Poolkemie POLIMOLD TR 40 is a two component room temperature vulcanising poly-urethane rubber which cures with addition of the appropriate hardener. Once cured, this rubber becomes flexible and resistant, free from air bubbles and imperfections. It is suitable in the manufacture of molds for production of articles made of plaster and cement thanks to its accurate reproduction of fine details and due to its extremely low linear shrinkage.

It is a two component room temperature vulcanising hand moldable silicon which cures on the addition of the appropriate CATALYST PX-30, according to the polycondensation process. SILIMOLD PX-30 silicon rubber is characterized by a medium high hardness, an high dimensional stability and a good mechanical resistance.

Poolkemie POLIMOLD HRP 30 is a Complex mold used in Serial reproduction of cement, plaster medium/large sized products, PU rubbers molds and Concrete rubbers mold.

Poolkemie POLIMOLD HR 30 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

Poolkemie POLIMOLD HRP 25 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie SILIMOLD HT 60 SILIMOLD HT 60 is a high hardness poly condensation silicone rubber (60 shore A). fluid owing to its high temperature resistance it is suitable for building flexible simple mold for the reproduction of small sized low-melting point alloy objects, lead or tin.