Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Excellent adhesion to glass
- Window & door approved
- Easy to gun, easy to tool
- Non-sag & slump
- Non-paintable
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Uses
XtraBond®150 can be used for a variety of applications including, but not limited to, general construction, kitchen & bath, transportation, industrial, etc.
- Direction for Use
For best results, prepare a clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications. This product is not compatible with rubberized asphalt.
- Linear feet/coverage per 10.1 fl. Oz. cartridge (298 ml)
Depth
Width 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/2” 99 49 33 24 20 16 14 12 3/8” 24 20 12 10 8 7 6 1/4” 11 8 6 5 5 4 1/8” 6 5 4 3 3
Properties
- Physico-Chemical Properties
| Value | Units | Test Method / Conditions | |
| Shore A | 15 - 25 | — | ASTM C661 |
| Sag/Slump | max. 0.2 | inch | ASTM D2202 |
| Elongation (at Break) | 350 - 400 | % | ASTM D412 |
| Tensile Strength | 160 - 200 | psi | ASTM D412 |
| 100% Modulus of Elasticity | 40 - 80 | psi | ASTM D412 |
| UV Rating (after 5000 hours) | No discoloration or change in appearance | — | ASTM G154 |
| VOC (Less water and exempt solvent) | max. 30 | g/L | EPA Method 24 |
| Solids | min. 80 | % | Internal Method |
| Service Temperature | -40 to 300 | °F | Internal Method |
| Cure Rate (Bead, in 48 hours) | 0.25 | inch | Internal Method |
| Density | approx. 8 | lbs./gal | Internal Method |
| Skin Time (at 70°F, 50% RH) | max. 15 | minutes | Internal Method |
| Tack Free Time (at 70°F, 50% RH) | max. 45 | minutes | Internal Method |
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container
- Shelf Life
- Cartridges/ Sausages, use within 18 months from date of manufacture
- Pails/ Drums, use within 12 months from date of manufacture