XtraBond® 1500NS - Non Skinning Premium Grade Butyl Sealant

Identification & Functionality

Product Type

1K (1 component) Sealant

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Adhesives & Sealants

Caulks & Sealants

Features & Benefits

Ready-to-Use Product Features

Good Adhesion,

Good Stain Resistance,

Improved Solvent Release,

Moisture Resistant,

Temperature Resistance

Features

Permanently pliable
Moisture resistant
Non-paintable
Non-skinning
Non-staining

Applications & Uses

Markets

Adhesives & Sealants,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Building Envelope & Roofing

EIFS & Insulation,

Waterproofing & Weatherproofing

Building & Construction — Building Materials

Sealants & Caulks,

Wall Panels

Industrial — Chemical & Industrial Manufacturing

Industrial Adhesives & Sealants

Consumer Goods — Cold-Chain & Insulation

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Adhesives & Sealants — Industrial & Assembly Adhesives

Industrial Manufacturing

Electrical & Electronics — Packaging & Assembly

Adhesives & Sealants

Application Area

Acoustic Barrier,

Freezer,

Roofing Membranes,

Wall Panels

Application Method

Gun

Compatible Substrates & Surfaces

Metal

Uses

XtraBond®1500NS can be used for a variety of applications including, but not limited to, walk-in coolers & freezers, insulated metal panels, acoustical, industrial, etc.

Direction for Use

• For best results, prepare clean surface.
• Cut nozzle to desired bead size.
• Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.
• Clean excess material with mineral spirits or similar solvent.

Surface Preparation

• The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.
• Do not apply if surface is damp or contaminated.
• It is recommended to test all substrates prior to applications.

Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)

Depth	Width
		1/8”	1/4”	3/8”	1/2”	5/8”	3/4”	7/8”	1”
	1/2”	99	49	33	24	20	16	14	12
	3/8”		24	20	12	10	8	7	6
	1/4”			11	8	6	5	5	4
	1/8”				6	5	4	3	3

All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use

 

Properties

Physico-Chemical Properties

	Value	Units	Test Method / Conditions
Sag/Slump	max. 0.2	inch	ASTM D2202
Staining	None	—	ASTM D2203
UV Rating (after 2500 hours)	No discoloration or change in appearance	—	ASTM G154
VOC (Less water and exempt solvent)	max. 150	g/L	EPA Method 24
Service Temperature	-40 to 200	°F	Internal Method
Cure Rate (Bead, in 36 hours)	Permanently tacky	—	Internal Method
Skin Time (at 70°F, 50% RH)	Permanently tacky	—	Internal Method
Tack Free Time	Permanently tacky	—	Internal Method

Packaging & Availability

Packaging Type

Cartridges,

Drums,

Pails

Packaging

• Cartridges
• Pails
• Drums

Storage & Handling

Storage

Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (max. 50% RH) environment at room temperature (71 - 75°F) in their unopened container. Do not freeze.

Shelf Life

• Cartridges/sausages, use within 12 months from date of manufacture.
• Pails/drums, use within 6 months from date of manufacture.