Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Lower Viscosity - Can be applied at a much lower mil thickness. Allows better penetration in concrete substrates. Properly seals the substrate. Provides excellent adhesion to almost all properly prepared substrates.
- Inter-coat Adhesion - Excellent when the product re-coat windows are followed.
- Urethane Primer - Designed as an adhesion primer.
- Easy to Use.
- Reduced Pinholing - Excellent on concrete.
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Instructions
PRECIDIUM™ 2200 is mixed 1 part resin to1 part ISO by volume. Poor mixing and measuring can lead to uncured material. To ensure proper mixing, the Resin is tinted white and the ISO is tinted black. First, mix the Resin and ISO separately so any settled pigment is mixed in. For mixing the Resin and ISO together, it is best if a jiffy mixer is used at high speed for at least 1 minute for mixing. The mixed color will be a uniform gray, with no visible black or white streaks that would indicate further mixing is required. Improper measuring (under-indexing of the ISO) will negatively affect the properties of the cured product. If in doubt, slight over-indexing of the ISO is preferable, but never uunder-indexing It is recommended to mix the amount of material that can be used in a 10-minute window. The best application method is by pouring out the product on the substrate and rolling out the product in a very thin coat with a high-quality, low-nap roller (eg. Wooster 3/16” nap. De-lint the roller prior to use.) Clean-up should be done immediately with MEK.
Properties
- Cured Properties
- Condition
*After 24 hours wipe surface with MEK or Acetone prior to re-coat.
Value | Units | Test Method / Conditions | |
Volume Solids | 75.0 | % | - |
VOC | 217.0 | g/L | - |
Mix Ratio (Volume, Resin:Iso) | 1:1 | - | - |
Durometer Hardness | 43.0 | Shore D | ASTM D2240 |
Tensile Strength | 1900.0 | psi | ASTM D412 (Die C) |
Elongation | 695.0 | % | ASTM D412 (Die C) |
Tear Strength | 300.0 | pli | ASTM D624 (Die C) |
Abrasion Resistance (CS-17 Wheel, 1000 Cycles 1000g Load) | 0.0 | mg loss | ASTM D4060 |
Touch Dry | 60 - 90 | min | - |
Tack Free | 110 - 130 | min | - |
Recoat * | 4 - 36 | h | - |
Packaging & Availability
- Packaging Type
- Packaging
AVAILABILITY PRECIDIUM™ 2200 is packaged in US Gallons (3.78 Liters), US 5-gallon Pails (18.9 Liters).
Storage & Handling
- Pot Life
- 20 min
- Storage
Store in a cool and dry place for product integrity. Store in tightly sealed containers to protect from moisture and foreign materials.