PRECIDIUM

PRECIDIUM™ P180D Primer is a solvent-free, zero VOC, two-component urethane primer designed for use as an adhesion primer with fast-set systems. It can be top coated in as little as 3 hours (depending on catalyst level and temperature), eliminating overnight cure times experienced with conventional primers. It significantly improves the adhesion and corrosion resistance of polyurea and polyurethane fast-set elastomers.

PRECIDIUM™ 2200 Primer is a 75% solids, high-performance, two-component polyurea elastomer primer ideally suited in combination with Quantum Chemical PRECIDIUM™ Membrane Systems. This product is very similar to 2100, however, the 1:1 mix lowers the viscosity of the 2200 so it can be applied at a much lower mil thickness, while allowing better penetration in concrete substrates, properly sealing the substrate and providing excellent adhesion to almost all properly prepared substrates. With the same chemistry as the other PRECIDIUM™ systems, inter-coat adhesion is excellent when the product recoat windows are followed.

PRECIDIUM™ Epoxy 41-P Primer is a two-component, corrosion inhibiting primer. This epoxy primer offers excellent corrosion resistance over properly prepared aluminum and steel substrates. PRECIDIUM™ 41-P was designed to be top coated with polyurethane or polyurea topcoats. It significantly improves adhesion and corrosion resistance of polyurea and polyurethane fast-set elastomers.

PRECIDIUM™ LS1150D RFS is a VOC-free two-component coating used on its own or as part of our PRECIDIUM™ LS1150D RFS, developed to provide an attractive, durable, chemically-resistant floor coating. Ideal substrates are properly prepared concrete, wood, steel, or other compatible polyurea coatings.

PRECIDIUM™ 2100 is a 100% solids, high-performance, two-component polyurea elastomer ideally suited for flooring applications where self-leveling properties are advantageous. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties. PRECIDIUM™ 2100 is a self-leveling system intended for use as a seam or system repair or membrane.

PRECIDIUM™ LS-1150D is a 0 VOC, aliphatic coating designed as an abrasion resistant top coat for polyurea and polyurethane systems or as a stand-alone product over properly prepared substrates. It is available in five standard colors (can be custom colored) and in optional non-skid finishes for a wide range of flooring and decking applications.

PRECIDIUM™ 950D is a 100% solids high-performance two-component polyurea elastomer that can be used for heavy-duty industrial applications, particularly for gravel truck boxes, dump trucks, and conveyor belts, shovels, etc. It has excellent resistance to a wide range of chemicals, coupled with superior physical properties. PRECIDIUM™ 950D is a fast set system intended for use with plural component spray equipment with a mix ratio of 1 to 1.