company tower banner

Products

Raschig

8 Products found on Raschig in Consumer Electronics

TDSWith TDS

MELOPAS® MF 2500 banner

MELOPAS® MF 2500

Polymer Name:Melamine Formaldehyde (MF)
Processing Methods:Injection Molding, Compression Molding
End Uses:Garden Equipment, Appliances, Electrical Components, Lawn Equipment, Household Goods
Density:1700.0 - 1800.0 kg/m³
Tensile Strength:70.0 - 90.0 MPa

MELOPAS® MF 2500 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

MELOPAS® MP 183 banner

MELOPAS® MP 183

Polymer Name:Phenol Modified Melamine
Processing Methods:Injection Molding, Compression Molding
End Uses:Appliances, Electrical Components
Density:1900.0 - 2100.0 kg/m³
Tensile Strength:50.0 - 80.0 MPa

MELOPAS® MP 183 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

MELOPAS® MF 150 banner

MELOPAS® MF 150

Polymer Name:Melamine Formaldehyde (MF)
Processing Methods:Injection Molding, Compression Molding
End Uses:Garden Equipment, Appliances, Trays, Electrical Components, Lawn Equipment, Household Goods
Density:1500.0 - 1700.0 kg/m³
Tensile Strength:40.0 - 50.0 MPa

MELOPAS® MF 150 is a Melamin.

RALUPOL® UP 804 banner

RALUPOL® UP 804

Polymer Name:Thermoset Polyester
Processing Methods:Injection Molding, Compression Molding
End Uses:Appliances, Electrical Components
Density:1000.0 - 2100.0 kg/m³

RALUPOL® UP 804 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

RALUPOL® UP 2200 banner

RALUPOL® UP 2200

Polymer Name:Thermoset Polyester
Processing Methods:Injection Molding
End Uses:Fittings
Density:1900.0 - 2100.0 kg/m³

RALUPOL® UP 2200 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

MELOPAS® MP 182 banner

MELOPAS® MP 182

Polymer Name:Phenol Modified Melamine
Processing Methods:Injection Molding, Compression Molding
End Uses:Appliances, Electrical Components
Density:1600.0 - 1700.0 kg/m³
Tensile Strength:55.0 - 85.0 MPa

MELOPAS® MP 182 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

MELOPAS® MP 180 banner

MELOPAS® MP 180

Polymer Name:Phenol Modified Melamine
Processing Methods:Injection Molding, Compression Molding
End Uses:Garden Equipment, Appliances, Trays, Electrical Components, Lawn Equipment, Household Goods
Density:1500.0 - 1700.0 kg/m³
Tensile Strength:50.0 - 70.0 MPa

MELOPAS® MP 180 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

MELOPAS® MF 152 banner

MELOPAS® MF 152

Polymer Name:Melamine Formaldehyde (MF)
Processing Methods:Injection Molding, Compression Molding
End Uses:Garden Equipment, Appliances, Electrical Components, Lawn Equipment, Household Goods
Density:1500.0 - 1700.0 kg/m³
Tensile Strength:50.0 - 90.0 MPa

MELOPAS® MF 152 is aCellulose-reinforced molding compounds based on melamine resin & melamine