Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

AROFLINT® 810 is an acid functional polyester resin supplied at 70% solids in a HAPS compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

UROTUF® F96-MPW-32 is a waterborne oil modified urethane dispersion. UROTUF® F96 was designed for single package crosslinked coatings. Crosslinking is achieved by air oxidation at ambient temperatures in the presence of metallic driers. UROTUF® F96 performance meets, and in many cases, exceeds that of conventional solvent borne oil modified urethanes. An added benefit is formulated VOCs below 200 grams per liter.

AROFLINT® 303-X-90 is an oxirane-modified ester supplied at 90% solids in xylene. It is used in combination with high acid value polyesters such as AROFLINT® 252-Z1-60, 404-XX-60, D808-XD-71, 809, or 810 at various ratios to yield high performance coatings where excellent appearance and toughness are required.

KELSOL® 3964-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

AROFLINT® 252-Z1-60 is a high acid value polyester supplied at 60% solids. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

KELSOL® 3969-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. *This product is also available in a HAPs-free solvent.

AROFLINT® 404-XX-60 is a high acid value polyester supplied at 60% solids in an exempt solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines. EPOTUF® 37-625 reacts at room temperature with solid or liquid epoxy resins.

AMBERLAC® 15-255 is a urethane modified alkyd resin designed to formulate solvent borne 1k PU systems for wood, floor and marine varnishes

AROFLINT® D808-XD-71 is a high acid value polyester supplied at 71% solids in an aromatic solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® 6421-X-75 is a short oil, chain-stopped alkyd in xylene at 75% solids for air dry or low temperature bake high solids industrial coatings.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

AROLON® 559-G4-70 is a non-oxidizing, water-dispersible, acrylic resin for formulating thermosetting coatings crosslinked with aminoplast resins. The uncrosslinked polymer is a hard film former. AROLON® 559 is cut in 2 butoxy ethanol and gives improved viscosity reduction. The resin should be neutralized with a volatile amine before dilution with water.

AROFLINT® 608 is an oxirane-modified ester supplied without solvent. It is used in combination with AROFLINT® 252 Z1-60, AROFLINT® 404-XX-60, AROFLINT® 808-XD-71, or AROFLINT® 91-314 (high acid value polyesters) to formulate high performance, durable coatings.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.