Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

BECKOSOL® 12-079 is a phenolic modified alkyd designed for use with flash-dry primers intended to be used under enamel and lacquer topcoats.

UROTUF® L53-MPW-30 is a fully reacted, color-retentive, thermoplastic, urethane dispersed in a blend of water and N-methyl pryrrolidone.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

UROTUF F101-MPW-45 is a high solids anionic stabilized oil modified urethane polymer provided at 45% solids in a blend of N-methyl pyrrolidinone and water.

UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer containing no free isocyanate groups.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.