Products

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

UROTUF F101-MPW-45 is a high solids anionic stabilized oil modified urethane polymer provided at 45% solids in a blend of N-methyl pyrrolidinone and water.

BECKOSOL® 1272 is a 100% solids, long oil soya alkyd which offers a wide range of compatibility with other film formers.

UROTUF® F87-M-80 is a high solids, aromatic oil modified urethane resin for interior trade sales finishes with a formulated VOC less than 300 grams per liter (2.9 pounds per gallon

FINE-CLAD® M-8930 is a carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for standard weathering with excellent physical properties.

UROTUF® F99-MPW-36 is an anionic stabilized oil modified urethane polymer provided at 36% solids in a blend of N-methyl pyrrolidinone and water.

KELSOL® 3939-WG4-45 is a chemically modified linseed oil supplied as a neutralized solution in water and co solvent.

FINE-CLAD® M-8911 is a superdurable carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for excellent weathering resistance

FINE-CLAD® A-241 is a resin with both hydroxyl and glycidyl groups. It is designed to reduce pinholes and improve stain resistance in powder coatings.

FINE-CLAD® M-8025 is a hydroxyl-functional polyester. It is designed to cure by urethane cross-linkers where it imparts high hardness, good weather resistance, and excellent stain resistance.

BECKOSOL AQ 101 is a long oil alkyd latex based on bio-renewable oils designed for use in architectural stains and enamels. This product shows good penetration into wood substrates in stain formulations; enamels show very high gloss. BECKOSOL AQ 101 requires no coalescing solvent for film formation, coatings meet all current or pending AIM VOC regulations in the US and Canada. BECKOSOL AQ 101 does not contain alkyl phenol ethoxylates.

BECKOSOL® 1271 is a 100% solids, long oil, linseed alkyd which offers a wide range of compatibility with other film formers.

FINE-CLAD® M-8900 is a carboxyl-functional polyester designed to cure with triglycidyl isocyanurate (TGIC) crosslinkers.

SYNTHEMUL® 40-136 is a 55%-solids, conventional, vinyl acrylic latex copolymer that provides excellent paint viscosity, low-temperature film formation, and ease of formulation.