Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

FINE-CLAD® M-8710 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

Aroplaz AQ™ 205 has been specially designed to protect topcoats from a variety of everyday stains. Primers formulated with Aroplaz AQ™ 205 outperform a best-selling commercial waterborne stain-blocking primer.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

BECKOSOL® 15-110 is a 100% N.V. medium soya oil alkyd resin designed mainly for industrial, graphic arts and traffic paints.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

AROPLAZ® 15-173 is a saturated polyester alkyl modified recommended to formulate polyurethane and melamine crosslinkable industrial finishes.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.

AMBERLAC® P 885 is a phenolic rosin modified alkyd resin, recommended for industrial enamels and primers and architectural enamels and clears

AMBERLAC® 13-802 is an acrylic-modified alkyd which offers fast dry, good color retention and excellent hardness.

KELSOL® 3912-G4-75 is a water reducible alkyd designed to give higher solids at lower viscosity. It must be neutralized prior to the addition of water, and usually requires additional co-solvent for best solubility and stability in water thinned paints

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

Thermoplastic polymer emulsion offering fast air dry and excellent water and humidity resistance.

FINE-CLAD® A551H is a flow promoter masterbatch. It contains about 15% of an active substance in a hydroxylated polyester.