Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

FINE-CLAD® M-8710 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

AROPLAZ® 15-173 is a saturated polyester alkyl modified recommended to formulate polyurethane and melamine crosslinkable industrial finishes.

BECKOSOL® 15-110 is a 100% N.V. medium soya oil alkyd resin designed mainly for industrial, graphic arts and traffic paints.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

Aroplaz AQ™ 205 has been specially designed to protect topcoats from a variety of everyday stains. Primers formulated with Aroplaz AQ™ 205 outperform a best-selling commercial waterborne stain-blocking primer.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

BECKOSOL® 15-250 is a versatile chain-stopped alkyd designed mainly for industrial coatings and car refinish.

BECKOSOL® 15-215 is a short soya oil alkyd resin designed mainly for 2 component architectural clears and NC lacquers, industrial coatings and car refinish.

FINE-CLAD® M-8950 is a carboxyl-functional polyester designed to cure with triglycidyl isocyanurate (TGIC) crosslinkers at relatively low temperatures, rapidly at standard cure temperatures.

Aroplaz AQ™ 206 is the high gloss, color stable resin you need for exceptional trim finishes. Weatherometer accelerated weathering results are displayed below, where exposure testing consists of alternating cycles of light and condensing humidity per SAE-J1960 test parameters and ASTM standard test method G153.

BECKOSOL® 15-254 is a versatile long oil alkyd resin designed mainly for architectural and industrial primer and enamels.

EPOTUF® 91-263 is a non-HAPs, water-reducible epoxy ester which, when neutralized with the proper amines, can be formulated into VOC-compliant coatings.

FINE CLAD® 11-540 is a carboxyl polyester resin designed to cure with epoxy resins at 60/40 polyester to epoxy ratio hybrid powder coatings systems.

RESAFEN® 17-313 is a maleic modified rosin resin designed mainly for modification in industrial and architectural varnishes and enamels. It is a hard resin soluble in aromatics, acetates and secative oils and partially soluble in mineral spirits. RESAFEN® 17-313 is also recommended for sealers and printing inks and varnishes.

RESAFEN® 12-229 is a novolac phenolic resin designed mainly for epoxy phenolic liquid or powder coatings.

FINE CLAD® M 8718 is a carboxyl polyester resin designed to cure with epoxy resins at 60/40 polyester to epoxy ratio hybrid powder coatings systems.

Aroplaz AQ™ 510 is a new platform of low VOC alkyd latex resins made from renewable resources. We take conventional alkyd chemistry and emulsify it in water to deliver a unique combination of alkyd performance and regulatory compliance, without the use of solvents. From stains to metal primers, look to Reichhold for premium performing alkyd latex resins mixed with environmental responsibility

BECKOSOL® 15-093 is a short DCO/Soya oil alkyd resin designed mainly for pigment dispersion, 2 component clears, NC Lacquers, industrial enamels and varnishes.

BECKOSOL® MS50 is a versatile medium soya oil alkyd resin designed mainly for architectural and industrial enamels and varnishes.

AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin supplied at 80% non-volatile in xylene.

BECKOSOL® 1700-M-60 is a premium quality, air dry, long oil, siliconized copolymer alkyd which meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels.

BECKOSOL® 2477-X-65 is a semidrying plasticizing alkyd resin developed for use in nitrocellulose and vinyl lacquers and in urea and melamine modified enamels. It offers good adhesion and great flexibility and toughness

BECKOSOL® CS60 is a versatile short soya oil alkyd resin designed mainly for industrial coatings and car refinish.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

BECKOSOL® 6422-K3-75 is a non-HAPs, short oil, chain-stopped alkyd in methyl propyl ketone for air dry or low temperature bake high solids industrial coatings.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

BECKOSOL® 13-4360-X is a chain-stopped alkyd, soyabean oil in xylol

BECKOSOL® 663-X-50 is a short rosin and phenolic modified oxidizing alkyd solution available in xylene. It meets Government Specifications TT-E-515a (Enamel, Alkyd, Lusterless, Quick-Drying) and TT-P-664c (Primer Coating, Synthetic, Rust-Inhibiting, Lacquer-Resisting).